Google Drive’s local sync client—Backup and Sync—usually has no issues backing up or syncing files and folders on the PC and Mac. But sometimes, it can just grind down to a halt. Bugs and glitches, connectivity problems, and improperly configured settings are some of the reasons why that happens.

If you find Google Drive Backup and Sync not working properly on your computer, then go through the fixes that follow. They should help you deal with slow or stuck uploads and downloads, as well as other snags that you may come across while using the cloud-storage service.

Table of Contents
    How to Fix Google Drive Backup and Sync Not Working image
    Online Tech Tips is reader-supported. We may earn a commission when you buy through links on our site. Learn more.

    Check Server Status

    If Backup and Sync worked fine a few moments ago, it’s best to confirm that there’s nothing wrong with Google Drive on the server-side.

    Start by heading into the Google Workspace Status Dashboard. Then, check the status indicator next to Google Drive. If it shows up in orange or red (as opposed to green), you’re looking at a service disruption or outage. In that case, you must wait it out until Google fixes the issue.

    Check Server Status image

    Pause and Resume Client

    Is Google Drive’s Backup and Sync client taking too long to upload or download files and folders? Or does it appear to be stuck? Try pausing and resuming. In most cases, that should get it to work normally.

    1. Select Backup and Sync from the system tray (PC) or the menu bar (Mac). Then, select the three-dots to open the Settings menu.

    Pause and Resume Client image

    2. Select Pause.

    Pause and Resume Client image 2

    3. Wait for a few seconds. Then, re-open the Settings menu and select Resume.

    Re-Open Backup and Sync

    Quitting and relaunching Backup and Sync is another fix that can help resolve slow or stuck uploads and downloads.

    1. Select Backup and Sync.

    2. Open the Settings menu and select Pause. Then, select Quit Backup and Sync.

    Re-Open Backup and Sync image

    3. Re-launch Backup and Sync from Google via the Start menu (PC) or the Launchpad (Mac).

    Restart Router

    Are you facing lousy internet speeds everywhere on your PC or Mac? Open some websites, play a few videos, or run a speed test to confirm. If things feel slow, try restarting your router. Once you’ve done that, pause and resume the Backup and Sync client to get things moving again.

    Restart Router image

    Reboot Computer

    Have you rebooted your PC or Mac in a while? A computer that’s been running for too long can develop all sorts of issues. Try doing that now and see if Google Drive Backup and Sync is still not working.

    Check Folder Preferences

    If Backup and Sync does not back up or sync a specific folder on your computer or in Google Drive, you must confirm that you’ve configured it properly.

    1. Open the Settings menu in Backup and Sync.

    2. Select Preferences.

    Check Folder Preferences image

    3. Switch between the My Computer and Google Drive tabs and confirm that you’ve selected the folders that you want to back up and sync.

    Check Folder Preferences image 2

    4. Select OK to save any changes.

    Log Out/Log Back In

    Logging out and signing back into your Google Account can also fix a slow or a stuck Backup and Sync client. You will not lose any locally synced files.

    1. Open the Settings menu in Backup and Sync. Then, select Preferences.

    2. Switch to the Settings tab and select Disconnect Account to log out from the sync client.

    Log Out/Log Back In image

    3. Reboot your PC or Mac.

    4. Sign back into Backup and Sync with your Google Account and pick the files and folders that you want to back up and sync.

    Log Out/Log Back In image 2

    5. Select Continue on any prompts that ask you to merge your files. That should help you avoid having to sync files from scratch.

    Check Bandwidth Settings

    Confirm that Google Drive’s Backup and Sync client isn’t bottlenecked by a restrictive download or upload rate.

    1. Open the Backup and Sync Preferences pane.

    2. Switch to the Settings tab and choose Network Settings.

    Check Bandwidth Settings image

    3. Make sure that Don’t limit is selected underneath both Download Rate Upload Rate.

    Check Bandwidth Settings image 2

    Switch DNS Servers

    If Backup and Sync faces constant connectivity problems, changing the Domain Name System (DNS) settings on your computer to Google DNS can help.

    Change DNS — PC

    1. Open the Start menu and select Settings.

    2. Select Network & Internet.

    3. Switch to the Wi-Fi tab and select your Wi-Fi connection.

    4. Scroll down to IP settings and select Edit.

    Switch DNS Servers image

    5. Select Manual and enable IPv4.

    Switch DNS Servers image 2

    6. Enter the following into the Preferred DNS and Alternate DNS fields:

    8.8.8.8

    8.8.4.4

    Switch DNS Servers image 3

    7. Select Save.

    Change DNS — Mac

    1. Open the Mac’s Control Center, select Wi-Fi, and select Network Preferences.

    2. Under the Wi-Fi side-tab, select Advanced.

    Switch DNS Servers image 4

    3. Switch to the DNS tab and replace the current DNS servers with the following:

    8.8.8.8

    8.8.4.4

    Switch DNS Servers image 5

    4. Select OK.

    Add to Firewall Exceptions

    Try adding Google Drive’s Backup and Sync client as a firewall exception. That should prevent the firewall on your PC or Mac from interfering with it.

    Add to Firewall — PC

    1. Open the Start menu, type windows security, and select Open.

    2. Select Firewall & network protection.

    3. Select Allow an app through firewall.

    4. Select Change settings, and then select the Allow another app button.

    Add to Firewall Exceptions image

    5. Select Browse and navigate to Local Disk (C:) > Program Files > Google > Drive. Then, pick the file labeled googledrivesync and select Open.

    6. Select Network types, check the box next to Private, and select OK.

    Add to Firewall Exceptions image 2

    7. Select Add.

    Add to Firewall — Mac

    1. Open the Apple menu and select System Preferences.

    2. Select Security & Privacy.

    3. Switch to the Firewall tab, select Click the lock to make changes, and choose Firewall Options.

    Add to Firewall Exceptions image 3

    4. Pick Backup and Sync from Google and select Add.

    Add to Firewall Exceptions image 4

    Delete Backup and Sync Configuration

    If none of the fixes above helped, try deleting the configuration files related to your Backup and Sync profile. That should remove any corrupt settings from messing things up. Quit Backup and Sync before you start.

    Delete Configuration Files — Windows

    1. Press Windows+R to open the Run box.

    2. Copy and paste the path below:

    %USERPROFILE%AppDataLocalGoogleDrive

    Delete Backup and Sync Configuration image

    3. Select OK.

    4. On the File Explorer window that shows up, delete the folder labeled user_default.

    Delete Configuration Files — Mac

    1. Open Finder and press Command+Shift+G.

    2. Copy and paste the following path:

    ~/Library/Application Support/Google/Drive/

    Delete Backup and Sync Configuration image 2

    3. Select Go.

    4. On the Finder window that shows up, move the folder labeled user_default to the Trash.

    Reinstall Backup and Sync

    Are you still having issues with Backup and Sync? It’s time to re-install it from scratch. That will not delete any locally synced files, so you can merge with them after re-installing the client. Exit the Backup and Sync client before you start.

    Uninstall Backup & Sync — Windows

    1. Right-click the Start menu and select Apps and Features.

    2. Locate and select Backup and Sync from Google.

    Reinstall Backup and Sync image

    3. Select Uninstall to remove it from your computer.

    Uninstall Backup & Sync — Mac

    1. Open Finder and select Applications.

    2. Locate and right-click Backup and Sync from Google.

    3. Select Move to Trash.

    Reinstall Backup and Sync image 2

    After removing Backup and Sync from your PC or Mac, re-download the Backup and Sync client and reinstall it. Then, sign in with your Google Account and set it up.

    Google Backup and Sync Issues Resolved

    Google Backup and Sync can stop working for several other reasons too. Sometimes, a Windows update can throw it off. It can be due to insufficient cloud storage on Google Drive as well. Try the above troubleshooting steps so that you don’t have to manually upload and download from Google Drive.