You’re lining up the perfect ult and the game stutters. A second later your hero is back at spawn, and you’re glaring at your monitor. If Deadlock feels choppy or laggy, the right Deadlock performance settings can make a real difference (no new graphics card required). The fixes below follow a practical order rather than a measured ranking: the FPS cap and V-Sync first, then the heavier visual effects, then Windows tweaks that sit under every game you play. How much each one helps depends on your hardware. One note on wording: “lag” here means low frame rates, stutter and input delay. These settings won’t fix high ping or packet loss, which come from your network connection or the game’s servers.
Deadlock is currently in a closed playtest rather than a general release on Steam. You’ll need an invite from an existing player before you can install or launch it, so the steps below assume you already have that access.
Quick Answer: The Highest-Impact Changes
1. Set an FPS cap a little above your monitor’s refresh rate, and turn V-Sync off to reduce input lag.
2. Turn on an upscaler (DLSS on NVIDIA RTX cards, or whichever upscaling option your menu offers) in Quality mode.
3. Lower or disable the heaviest effects: shadows, ambient occlusion, distance-field effects, and area lights.
4. Make sure Deadlock runs on your dedicated GPU, especially on laptops.
5. Update your graphics drivers.
Deadlock Performance Settings at a Glance
| Your Problem | Recommended Fix |
|---|---|
| Low or choppy FPS on an older PC | Upscaler in Quality mode, then lower the heavy effects |
| Input feels delayed or “floaty” | V-Sync off, FPS cap near your refresh rate |
| Stutter even though average FPS looks fine | FPS cap near refresh rate, Game Mode on, play from an SSD |
| Laptop runs the game poorly | Set Deadlock to “High performance” GPU in Windows |
| Crashes or odd glitches | Update your graphics drivers |
| Settings feel broken after lots of tweaking | Try the -autoconfig launch option (Valve documents it for Source games, not Deadlock specifically) |
What Is Deadlock?
Deadlock is a PC game from Valve, currently in a closed playtest rather than a general release on Steam. Access is invite-only: you’ll need a friend who already has access to send you one before you can install or launch the game.
Once you’re in, Deadlock works like most modern Valve games, with an in-game video menu where each option trades visual detail for frame rate. Check the official Steam page for the latest access and pricing details.
The game is still in active development, with new builds released regularly (Deadlock Wiki Changelog; undeadlock.com/patches). Menu wording can shift between patches. Treat the labels below as a guide and match them to what you see in-game.
Getting better FPS in Deadlock comes down to three layers:
- Frame-pacing controls like the FPS cap and V-Sync, which affect smoothness and input lag
- Visual-quality options like shadows and lighting effects, which affect how hard your GPU works
- Windows and driver settings, like Game Mode, GPU preference, and driver updates
This guide is most useful for casual players on mid-range or older hardware, and for laptop gamers.
Prerequisites
- Access to Deadlock’s closed playtest, since the game isn’t yet available for general purchase or installation on Steam
- A Windows PC (Steam lists Windows as the platform, but Valve’s operating system requirement is still marked TBD)
- The Steam client installed and signed in
- Deadlock installed through Steam, once you have playtest access
- A PC with a capable graphics chip. Valve’s graphics requirements are still listed as TBD, so integrated graphics may work, but a dedicated card gives you more room to raise settings
- Enough free storage for the install, ideally on an SSD or NVMe drive (Valve’s storage requirement is still listed as TBD)
Note: Valve hasn’t published official minimum or recommended system requirements. Any hardware “targets” you see online are community estimates (dodge.gg), not official specs.
How to Get Better FPS in Deadlock: Step-by-Step
Step 1: Open the In-Game Video Settings
If you have playtest access, launch Deadlock from your Steam library. Open the settings menu from the main menu, then click the Video (or Graphics) tab. The exact tab name can change between patches.
Expected result: You see a list of display and graphics options, including resolution, window mode, and quality settings.
Step 2: Set Full-Screen Mode and Native Resolution
Set Window Mode to Full-Screen. It’s generally recommended over windowed or borderless for performance (dodge.gg). Then set Resolution to your monitor’s native resolution, such as 1920×1080 on most 1080p screens.
Expected result: The image fills your screen and looks sharp, not stretched.
Step 3: Set Your FPS Cap (Maximum FPS)
This setting controls smoothness and latency. Find Maximum FPS (or a similarly named frame-rate limit) and set it a little above your monitor’s refresh rate. On a 144Hz gaming monitor, for example, many players start around 154. That’s a common starting point, not a Deadlock-specific benchmark. If you use a variable refresh rate display (G-SYNC or FreeSync), a cap a few frames below your refresh rate is often the better choice, so test both.
Why not leave it uncapped? Think of your GPU like a car engine. Redlining it all the time doesn’t get you there much faster, but it does make the ride bumpier. A sensible cap evens out frame delivery and cuts down on sudden spikes.
Expected result: Your frame rate stays steadier, with fewer sudden dips.
Step 4: Turn V-Sync Off
V-Sync matches frames to your monitor’s refresh cycle. That stops screen tearing, but it can add input lag (the delay between clicking and seeing it happen on screen). Most competitive players turn V-Sync Off and rely on the FPS cap instead.
Should you ever leave it on? If screen tearing bugs you more than a bit of extra delay, sure. For a fast shooter like Deadlock, though, off is the usual pick.
Expected result: Aiming and movement feel more responsive.
Step 5: Choose Your Rendering API
If your menu offers a Rendering API choice, you can try both. Some community guides suggest starting with Direct3D 11 (dodge.gg), but that’s player advice rather than Valve documentation or a benchmark, so compare it with the other option on your own PC.
Vulkan may improve performance on some AMD systems, but results vary by hardware and drivers, and this isn’t an official benchmark. You’ll probably need to restart the game for any change to take effect.
Expected result: The game relaunches using the API you picked.
Step 6: Turn On an Upscaler
Upscaling renders the game at a lower resolution behind the scenes. Then it stretches the image back up to fit your screen. It’s a bit like printing a slightly smaller photo and enlarging it smartly. You lose a little sharpness, but your GPU has much less work to do.
Exact upscaler options can vary by patch and hardware, so check what’s actually listed in your Video menu.
- NVIDIA RTX cards: DLSS, if your menu lists it, only runs on RTX hardware.
- Other GPUs: Pick whichever non-DLSS upscaling or anti-aliasing option your menu offers. The exact names depend on the current build.
- Which mode? Start with Quality. It’s the best balance of clarity and speed. Drop to Balanced or Performance only if you still need more frames.
Expected result: Higher frame rates, with an image that’s slightly softer than native resolution.
Step 7: Lower the Heaviest Visual Effects First
After the FPS cap and upscaler, this is often your biggest FPS lever. The order below is a rough guide based on community advice (dodge.gg), not a benchmark; the real cost of each effect depends on your GPU, resolution, rendering API and the current build. Skip any option that isn’t in your current menu, since Deadlock is still in active development and exact setting names can change.
- Shadow Quality: One of the most GPU-intensive settings. Set it to Low or Medium.
- Distance Field Shadows / Distance Field Reflections: Expensive advanced lighting. Turn them Off, especially on older hardware.
- Screen Space AO / Distance Field AO: Ambient occlusion adds soft shading in corners and crevices. Turning it Off is one of the better frame-rate fixes.
- Area Lights: A more realistic but costly lighting model. Turn it Off.
- MBOIT: A transparency-rendering technique (short for order-independent transparency) that can be demanding. Turn it Off.
- Displacement Mapping: Adds surface detail you’ll rarely notice mid-fight. Turn it Off.
- Fog Quality: Set it to Low.
- Bloom: Light-glow effects. Turning it Off saves a modest amount of work.
- Depth of Field: Blurs the background for a cinematic look. Turning it Off also makes distant enemies easier to see.
- Motion Blur: Pure eye candy with no gameplay benefit. Turn it Off. (It’s probably the most pointless effect in any competitive game!)
Lowering these settings mostly changes how the game looks, but some can also affect what you notice in a fight. Shadows and lighting effects can help you spot enemies, so if anything looks harder to read, raise that one setting a notch. Motion blur and depth of field, on the other hand, often make fights easier to read once they’re off.
Expected result: The game looks a bit plainer but runs noticeably smoother.
Step 8: Turn On Windows Game Mode
Game Mode is a built-in Windows feature generally understood to prioritize your active game over background tasks, though Microsoft’s documentation on its exact effects is limited. It won’t turn a weak PC into a powerhouse, but it can cut down on random interruptions.
- Press
Windows + Ito open Settings. - Click Gaming > Game Mode.
- Switch the Game Mode toggle to On.
Expected result: The toggle shows On. Microsoft notes Game Mode works automatically for most games, so you won’t see a separate per-game confirmation.
Step 9: Force Deadlock onto Your Dedicated GPU
Many laptops have two graphics chips: a weak power-saving one and a stronger dedicated one. Windows sometimes picks the weak one. That can wreck your frame rate.
- In Steam, right-click Deadlock and choose Manage > Browse local files to see where the game is installed. Look through the game folders for the Deadlock
.exefile. - Press
Windows + I, then go to System > Display > Graphics. - Click Browse (or Add desktop app) and select the Deadlock
.exefile. - Click Deadlock in the list, choose Options, select High performance, and click Save.
Expected result: Deadlock appears in the list set to High performance, showing your dedicated GPU’s name.
Tip: Microsoft rearranges Settings from time to time, so labels can differ slightly between Windows 10 and Windows 11.
Step 10: Update Your Graphics Drivers
GPU makers sometimes release drivers with game-specific fixes, and outdated drivers can generally contribute to crashes, stutter, or lost performance, though this isn’t confirmed specifically for Deadlock.
- Press
Windows + Iand click Windows Update. - Click Advanced options > Optional updates.
- Expand Driver updates, tick any graphics driver listed, and click Download & install.
- Restart your PC when it finishes.
Menu labels and steps here can vary slightly between Windows versions and builds, so adjust as needed.
For the newest drivers, you can also download them straight from NVIDIA, AMD, or Intel. The NVIDIA App or AMD Software: Adrenalin Edition can also check for you automatically.
Expected result: After restarting, your PC is running the latest available graphics driver.
Configuration: Using -autoconfig as a Possible Reset
-autoconfig is a Valve launch option. Steam Support describes it as resetting a game’s video and performance settings to defaults for the detected hardware, but lists it for GoldSrc and Source engine games. Valve hasn’t documented it for Deadlock specifically, so it’s worth trying when your video settings feel broken, not a guaranteed reset.
Treat it as an experiment rather than a confirmed Deadlock feature. If you try it, watch what actually changes in your own Video menu afterward, since the real effect may differ from what’s described online.
To use it:
- In Steam, right-click Deadlock and choose Properties.
- On the General tab, find the Launch Options box.
- Type the following:
-autoconfig
- Close the window and launch Deadlock once.
- Go back to Launch Options and delete
-autoconfigso your launch options are back to how they were. - Re-apply the changes from this guide one at a time.
Expected result: Your settings may return toward the game’s defaults, though Valve hasn’t documented this precisely. Check your Video menu afterward to confirm what actually changed before re-tuning.
Tips and Troubleshooting
Problem: The image looks blurry after turning on upscaling
- Switch the upscaler from Performance or Balanced to Quality.
- If there’s a render-resolution slider, raise its percentage a little.
Problem: Stutter even though average FPS looks fine
- Set your FPS cap close to your refresh rate, not far above it.
- Turn on Game Mode (Step 8).
- Close heavy background apps before you play.
- If the game lives on an old hard drive, moving it to an SSD or NVMe drive can help with loading hitches. It won’t fix stutter caused by your GPU or CPU, and it hasn’t been benchmarked specifically for Deadlock.
Problem: Performance is worse than a friend’s similar PC
- Try the other Rendering API option (Step 5) and keep whichever runs better.
- Compare your Video settings side by side, since one heavy effect can explain a big gap.
Problem: FPS dropped after a recent patch
- Deadlock updates often, and some updates have been substantial (Deadlocker.gg).
- Re-open the Video menu and confirm your settings are still in place and labeled the same way.
Pro tips:
- Change One Thing at a Time: That way you know exactly which change helped (or hurt).
- Watch Your Numbers: A monitoring overlay like MSI Afterburner shows whether a change actually lowered your GPU load.
- Plug In Your Laptop: Many laptops throttle the GPU on battery, so play plugged in.
Wrapping Up
Smoother Deadlock gameplay usually comes from a handful of small changes. If you only do one thing, set a sensible FPS cap with V-Sync off, then turn on an upscaler in Quality mode. That combo tackles both lag and low frames.
In my opinion, most players can turn off motion blur, depth of field, and the fancy lighting effects without missing a thing. Still struggling after all that? Check whether your GPU is maxed out in a monitoring overlay. If it is, a graphics card upgrade is the next stop; a faster SSD mainly helps loading times.
| Step | Action | Applies To |
|---|---|---|
| 1–2 | Full-Screen mode, native resolution | All PCs |
| 3–4 | FPS cap near refresh rate, V-Sync off | All PCs |
| 5 | Compare the Rendering API options | All PCs |
| 6 | Upscaler in Quality mode | All PCs, especially older GPUs |
| 7 | Lower heavy effects | All PCs |
| 8 | Windows Game Mode on | Windows 10/11 |
| 9 | High performance GPU preference | Laptops and dual-GPU PCs |
| 10 | Update graphics drivers | All PCs |
| – | -autoconfig (Valve launch option, not documented for Deadlock) | When settings feel broken |
Resources
- Deadlock on Steam
- Deadlock System Requirements & Optimization Guide (dodge.gg)
- Deadlock Wiki Changelog