Fix Registry editing has been disabled by your administrator error修復註冊表編輯已被管理員禁用錯誤
Posted on September 4, 2008 at 5:38 am張貼於2008年9月4日在上午05時38分
If you’ve recently tried to open the Windows Registry and were presented with the message” “ Registry editing has been disabled by your administrator ”, then you’re not alone!如果您最近試圖打開Windows註冊表，並介紹了與訊息“ ， ” 註冊表編輯已被管理員禁用 “ ，那麼您並不孤單！ You can get this message for several reasons and sometimes will not be able to run regedit unless you are an Administrator.你可以得到這個訊息，原因有幾個，有時將無法運行regedit ，除非你是管理員。
Most of the time you will see this in corporate environments where the IT staff has locked down the computer by大部分的時間，您就會看到此，在企業環境下的IT人員已鎖定電腦 disbaling Windows settings and services disbaling Windows設置和服務 . 。 If it’sa policy pushed out by the main servers, it’ll be pretty hard to bypass, however you can still try!如果是政策推動，由主要服務器，它會相當努力繞道，但你仍然可以嘗試！
In order to re-enable access to edit the registry, you can try to edit the group policy settings and see if that works.在以重新啟用進入編輯註冊表的信息，您可以嘗試編輯組策略設置，並看看是否能工程。 If you know the local admin password for the computer, log in under that account.如果你知道當地的管理員密碼為計算機，記錄下在該帳戶。 If not, you can still give it a shot.如果不是，您仍然可以給它一個鏡頭。
Method 1方法1
Step 1: Click on Start , choose Run and type in gpedit.msc .第1步：點擊開始 ，選擇運行，並鍵入在gpedit.msc 。
Step 2: Navigate to User Configuration – Administrative Templates – System第2步：瀏覽到用戶配置-管理模板-系統
Step 3: In the right hand pane, double click on “ Prevent access to registry editing tools ”第3步：在右手窗格中，雙擊，然後點擊“ 阻止訪問註冊表編輯工具 ”
Step 4: If it is not configured, go ahead and enable it, click OK and then come back and disable it.第4步：如果是未配置，繼續和啟用它，單擊確定，然後再回來，並禁用它。 If it’s already set to Enabled, then simply disable it.如果它已經設置為啟用，然後只需禁用它。
Now try to run the registry editor and see if that works.現在嘗試運行註冊表編輯器，並看看是否能工程。 If not, go to the command prompt (Start, Run, type cmd) and type in gpupdate.如果沒有，請轉到命令提示符（開始，運行，鍵入cmd ）和類型在gpupdate 。 But if you are in a corporate environment, you may not want to do this as it will update back to the restrictive setting.但如果你是在企業環境中，您可能不希望這樣做，因為這將更新回的限制性設置。
In that case, restart the computer, but unplug the network cord so that the computer does not refresh the group policy from the main server.在這種情況下，重新啟動電腦，但拔掉網線，使計算機不刷新組策略從主服務器。 You may also want to do the procedure above while disconnected from the network completely in order to ensure that the policy does not get overridden by the corporate policy.您可能還需要做上述程序的同時，斷開網絡，完全以確保該政策不會凌駕企業的政策。
If you have a home computer, then you don’t have to worry about all of this, just restart your computer and you should be able to edit your registry again.如果您有家用電腦，那麼你就不用擔心關於這一切，只是重新啟動計算機和您應該可以修改您的註冊表。
Method 2方法2
Another method you can use is to go to Start, then Run and paste the following line into the run box:另一種方法，您可以使用的是去開始，然後運行並粘貼以下線運行框中：
REG add HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System /v DisableRegistryTools /t REG_DWORD /d 0 /f 條例新增HKCU中\軟件\微軟\的Windows \ currentversion \政策\系統/視頻disableregistrytools /噸的REG_DWORD / 0 / f
Now try to open the registry editor and see if it works.現在嘗試打開註冊表編輯器，看看是否工程。 You may have to restart your computer for the effects to take place.您可能必須重新啟動計算機的影響，採取的地方。
Note: Before making any changes to the registry, read my article on注：在作出任何更改註冊表，看過我的文章 how to backup and restore the registry如何備份和恢復註冊表 in case something goes wrong.在一些情況下錯在哪裡。
Method 3 方法3
If you don’t like to mess with the registry, you can download a VBScript that will enable the registry for you when you run it.如果你不喜歡到一塌糊塗，與書記官處，您可以下載一個VBScript中，這將使註冊表中當您運行它。 The script is a little more advanced and will not harm your computer, it’s actually written by a Microsoft MVP!腳本是一個小更先進的，並不會損害您的計算機，它實際上書面由Microsoft的MVP ！
You can download the script您也可以下載的腳本 here 這裡 and then just double click on it to run it.然後剛才，雙擊它運行它。 After that, try the registry should be enabled.之後，嘗試登錄，應該啟用。
If none of the above methods work, you may have a virus or some other sort of malware installed on your computer.如果沒有上述方法的工作，您可能有病毒或其他一些形式的惡意軟件安裝在電腦上。 In some cases, there is a file called regedit.com that gets created and you have to either delete it or rename it to regedit.exe.在某些情況下，有一個名為regedit.com起來創造和你要刪除它或將它重新命名為Regedit.exe中。 Read this post on閱讀這個職位上 how to remove spyware and malware如何刪除間諜軟件和惡意軟件 from your computer.從您的計算機。 Enjoy!享受！
» Filed Under »提交下 Windows XP Windows XP中
 Save this page 保存此頁 |  Stir it up on Mixx 轟動起來就mixx | |
 Add to Reddit 添加到reddit |  Stumble this page 蹣跚此頁 |
Related Posts 相關文章
- How to fix runonce.msn.com runonce2.aspx error in IE7如何修復runonce.msn.com runonce2.aspx誤差在IE7中
- How to disable settings, services, and programs in Windows XP如何禁用設置，服務和程序在Windows XP
- How to get rid of Unread Mail Count in Windows XP如何擺脫未讀郵件計數在Windows XP
- How to backup and restore the Windows Registry如何備份和恢復Windows註冊表
- Disable restart now message after Windows automatic update message禁用立即重新啟動的訊息後， Windows自動更新訊息
