Install software virtually and protect your computer using Altiris software virtualization安裝軟件實際上並保護您的電腦上用altiris軟件虛擬化

Posted on October 22, 2007 at 11:17 am張貼於2007年10月22日在上午11時17分

As a tech blog writer, I routinely install software onto my computer before writing about it and recommending it.作為一個高技術博客作家，我照例安裝軟件到我的電腦前寫它和推薦。 However, I usually do not uninstall every program simply because it takes time and I’m lazy, so eventually my computer starts to get very slow.不過，我通常是不卸載的每個程序都簡單，因為它需要時間，我很懶惰，所以最後我的電腦開始變得非常緩慢。 At that point, I do a good spring cleaning and wipe out all the programs I’m not using.在那一刻，我做的一個很好的大掃除，並消滅對方的所有節目，我不會用。

To find a solution for keeping my computer running smoothly without having to run all of my software on a virtual machine, I ended up finding a free program called為了找到解決問題的辦法，為保持我的計算機運行順利，而不必運行我的所有軟件，在一個虛擬機，我終於找到一個免費程序名為 Altiris Software Virtualization Solution altiris軟件虛擬化解決方案 (SVS). （ svs ） 。 Using this program, you install software into a "virtual layer" instead of onto your operating system which captures all files changes, registry changes, and system changes and saves them into the layer instead of onto your computer.利用這個節目，你安裝的軟件進入"虛擬層" ，而不是把你的操作系統博得了所有文件的變化，登記的變化，以及制度變遷，節儉成層而不是上你的電腦。

So you might ask "Well what does that mean?"因此，你可能會問： "是什麼意思" ？ Basically, it means that every change to the system is NOT PERMANENT , which means you can uninstall an application cleanly (as if it was never installed) and avoid registry changes which end up slowing your computer down.基本上，這意味著每一個變化，該系統是不是永久性的，這意味著你可以卸載應用乾淨（如果是從未安裝） ，並避免註冊的變化，最終放慢你的電腦了。 It keeps your registry clean and avoids modification of system files.它口口聲聲註冊表清潔，避免改造的系統文件。

Another really nice feature of installing software into a virtual layer is that if the program becomes corrupt or ends up in a non-working state, you can SWTICH back to the originally installed version of the program (reset it).另一種真尼斯的特點，安裝軟件到一個虛擬層的是，如果該計劃成為腐敗或結束了，在非工作狀態，你可以swtich回复到原先安裝的版本的程序（重置） 。 Also, if you’re trying to install one application that conflicts with another application, you can use Altiris SVS to install it in its own layer which will be completely invisible to other apps.另外，如果你試圖安裝一個應用程序的衝突與另一份申請，你可以使用altiris svs安裝它在自己的層，將完全隱形，不讓其他應用程序。

Once you’ve downloaded the application and run the installer, you’ll be asked for the Product Key.一旦你下載的應用和運行安裝程序，你將被要求為產品的關鍵。 Click Get it Free and type in your email address.點擊獲得自由和在此輸入您的電子郵件地址。 You’ll be able to download the key.以後你們可以下載關鍵。

Now that it’s installed, you can either download現在，它的安裝，您可以下載 pre-created virtual software packages前創造的虛擬軟件包 of about 40 applications or you can start with a new app.約40份申請或者，你可以開始一個新的亞洲漿紙。 Downloading the pre-created SVS packages means they will automatically run in a virtual layer.下載前創造svs軟件包意味著它們會自動運行在一個虛擬層。 If you’re installing your own app, you need to make sure you install it using the SVS program, otherwise it’ll install normally.如果你安裝你自己的應用程序，你需要確認你安裝它用svs計劃，否則將安裝正常。

To install a new app in a virtual layer, follow these steps:要安裝一個新的亞洲漿紙在一個虛擬層，請按照下列步驟：

1. 1 。 Download the program that you want to install下載節目中，你想要安裝

2. 2 。 Open the Altiris SVS Admin program.打開altiris svs政府當局計劃。 Choose File and then Create New Layer .選擇文件 ，然後再創造新的層。

軟件虛擬化

3. 3 。 Choose Install Application and click Next .選擇安裝應用並單擊下一步。

虛擬層

4. 4 。 Name the layer after the program and click Next.名稱層後，該計劃並單擊下一步。 Select Single program capture .選擇單一程序捕獲 。 Browse for the install file and then click Next and Finish .瀏覽install文件，然後單擊下一步和完善的過程。

虛擬軟件  

5. 5 。 Now install the program like you normally would.現在安裝程序一樣，你通常會。 Any files or registry changes that the install makes will be recorded by SVS and put into the virtual layer.任何文件或註冊處的變化安裝，使將被載入由svs並投入虛擬層。

As the program records the changes, you’ll see a lightening bolt in the system tray.隨著該計劃的紀錄變化，你會看到一個閃電螺栓在系統托盤。 After the installer finishes, the base layer for the program will have been captured.之後，安裝程序完成時，基地層為計劃將對被抓走了。 Any changes after this point can always be reset to the original layer by right-clicking on the layer and choosing " Reset Layer ".任何改變後，這點是可以永遠被復位到原來層右鍵單擊該層，選擇" 復位層" 。

You can also deactivate the layer and the program will simply disappear from your computer as if it had never been installed.你也可以關閉層和計劃將根本消失，從你的電腦好像它從未被安裝。 You can reactivate the layer at any time.你可以重新啟動該層在任何時間。

Software virtualization is a great way to keep your operating system running smoothly no matter how many applications you decide to install.軟件虛擬化是一個偉大的方式讓您的作業系統運作暢順，無論有多少應用，你決定要安裝。 So the next time you’re planning on installing an app, make sure you install it into a virtual software layer!因此，下一次你計劃安裝一個應用程序，確定你安裝它轉化為一台虛擬軟件層！

Technorati Tags: technorati的標籤： , ， , ， , ， , ， , ， , ，

If you enjoyed this post, make sure you 如果你享受這個職位時，要確保你 subscribe to my RSS feed 訂閱我的rss飼料 ! ！

» Filed Under »存檔下 Software Reviews軟件評語

Related Posts相關職位

One Response to “Install software virtually and protect your computer using Altiris software virtualization”其中一個回應"安裝軟件，實際上並保護您的電腦上用altiris軟件虛擬化"

  1. Aibek 艾別克 said on : 說： October 22nd, 2007 at 11:49 am 2007年10月22日在上午11時49分

    Exactly what I was looking for.正是我一直在尋找的。 Thanks感謝 ;-)


    Please post your comments/suggestions!請後，你的意見/建議！