Windows Server 2003/Small Business Server hangs on "Applying Computer Settings" Windows Server 2003/Small Business Server cuelga sobre "La aplicación de Computer Configuración"

Posted on March 9, 2007 at 2:40 pm Enviado el 9 de marzo de 2007 a 2:40 horas

Horribly, I had this happen to me as I walked into work one morning (thankfully a Friday) and it took me a whole weekend to figure out what the problem was. Horriblemente, tuve que esto pasara a mí como que entré en una mañana de trabajo (afortunadamente un viernes) y me tomó toda una semana para averiguar cuál es el problema. Basically, the reason your server is hanging is because there is a service that is not loading correctly when Windows tries to start up. Básicamente, el motivo de su servidor es ahorcamiento se debe a que existe un servicio que no carga correctamente cuando se trata de iniciar Windows. So basically this service hangs and then your computer hangs! Así que, en principio este servicio se cuelga y, a continuación, el equipo se cuelga! And it might take 2 to 3 hours before you get to see the desktop…not really what you want to happen when you have 100’s of users wondering what’s going on!! Y de que puede llevar 2 a 3 horas antes de llegar para ver el escritorio… realmente lo que no queremos que ocurra cuando usted tiene 100's de los usuarios de saber lo que está pasando! Thankfully for me, most of the other services were able to load, so even though I was not able to get to the desktop, people were still able to access the network drives. Afortunadamente para mí, la mayoría de los demás servicios fueron capaces de carga, de modo que aunque no fue capaz de llegar al escritorio, la gente estaba todavía en condiciones de acceder a la red.

Anyway, getting to the fix: You need to restart the server in safe mode and log in. This will work because only the necessary services are started up. En cualquier caso, llegar a la solución: es necesario reiniciar el servidor en modo seguro y acceder Esto funciona porque sólo los servicios necesarios se iniciase. Once you’re in, go to your Event Viewer and check for any “Service Failure” entries in the System or Application logs. Una vez que está en, vaya a su Visor de sucesos y revise que no haya ninguna "La falta de servicios" en las entradas del sistema de registros o solicitudes. For me, it was the APS PowerChute service that was the culprit! Para mí, es la APS PowerChute servicio que fue el culpable! I had installed it a fews days back, but since I had not restarted the server after the installation, I didn’t get any inkling this was going to happen! Me había instalado en un pocos días atrás, pero como yo no había reiniciado el servidor después de la instalación, no me han dado toda esta idea se va a pasar!

Go to your Administrative Tools and go to Services. Vaya a su Herramientas administrativas e ir a los Servicios. Find the service that is causing the error, i.e. APS PowerChute, and disable it! Encuentre el servicio que ha causado el error, es decir, PowerChute APS, y desactívelo! Now restart and you should be able to get in! Ahora reinicie y debería ser capaz de ponerse en!

If you enjoyed this post, make sure you Si gozan de este puesto, asegúrese subscribe to my RSS feed Suscribirse a mi feed RSS ! !

» Filed Under »Presentadas en virtud del IT Job Stuff IT Empleo Stuff

Related Posts Related Puestos

Please post your comments/suggestions! Por favor enviar sus comentarios o sugerencias!