¡Maneras simples de aumentar su funcionamiento de computadora - excepto espacio de disco duro!
Fijado el 11 de abril de 2007 en 8:56 P.M.
¡Cerciórese de leer otros postes de la serie del funcionamiento de computadora del aumento!
- Maneras simples de aumentar el performace de su computadora - configuración del archivo que pagina
- Maneras simples de aumentar el performace de su computadora - Defragmenting su impulsión dura
- ¡Maneras simples de aumentar el performace de su computadora - parar los programas del arranque!
- ¡Maneras simples de aumentar su funcionamiento de computadora - excepto espacio de disco duro!
- Las maneras simples de aumentar el performace de su computadora - dé vuelta apagado a poner en un índice en sus impulsiones locales
- Las maneras simples de aumentar su funcionamiento de computadora - inhabilite los efectos visuales en la lengüeta de las opciones del funcionamiento
¿Usted tiene una computadora que no tenga una impulsión dura enorme, pero usted almacena los muchos de cuadros, de videos, o de otros archivos grandes que están consiguiendo su espacio libre bajo? Una vez que su computadora consiga baja en espacio de disco duro, los procesos normales comienzan a retrasar y su computadora funcionará doloroso lento. Hay por supuesto porciones de otras razones por las que su computadora pudo funcionar lentamente, pero este poste está específicamente para los que sepan que están funcionando brevemente en espacio de disco.
Tan en vez de tener que suprimir archivos o quitar cosas a los palillos o a las impulsiones duras externas, usted del USB puede primero intentar liberar para arriba un cierto espacio en su computadora que se puede tomar por los ficheros temporales inútiles o los procesos del sistema. ¡Hay generalmente tres el espacio grande “asesinos” en Windows que sean fijados por el defecto para hog la espacio de disco y deban ser contenidos adentro tan pronto como usted pueda!
1. Recicle el compartimiento ¿- Por qué selección en el compartimiento del reciclaje eh?? ¿El bote de basura nunca-irritante y a veces salvavidas apenas se sienta allí esperándonos para decirle lo que a hacer a la derecha? Bien, también toma los muchos de espacio que no necesita. El compartimiento del reciclaje utiliza un porcentaje de su impulsión dura para almacenar archivos suprimidos. Sin embargo, este porcentaje es fijado por el defecto en un número muy alto y los extremos para arriba que pierden muchos de espacio.
Aquí es cómo fijar el asesino #1 del espacio. Primeros derechos chascan encendido el compartimiento del reciclaje en su tablero del escritorio y chascan Características.
En la lengüeta global, usted puede elegir Utilice uno que fija para todas las impulsiones o Configure las impulsiones independientemente . It’s usually better to configure the recycle bin for each drive independently since it’s based on the size of the drive, so 5% of a 50GB hard drive is much bigger than 5% of a 20GB hard drive. At the top you’ll see tabs for each partition you have on your computer.
By default, the slider bar is usually set at something like 12%, which is very high! Unless you are deleting huge files, there will never be a need for a recycle bin that size. A good size is from anywhere between 3 to 5% of your hard drive. Drag the slider bar and you just saved yourself a good amount of space, especially if you have large hard drives. My computer is set to 1% and I’ve never had a problem recovering a file from the bin!
2. Turn Off System Restore - Another handy little service that can get your computer back up and running sometimes, but again takes up a lot of extra space that is not needed. Also, System Restore only recovers Windows files, not any of your data. So having System Restore enabled on any other drive other than your C drive (where Windows is installed) is completely useless.
To fix this one, right click on My Computer and choose Properties.
Click on the System Restore tab.
As you can see from my computer, I have a C and a D drive of which system restore has been turned off on D. Again, this is because System Restore does not protect your data, it only protects Windows system files, so you don’t need it for any other drive other than the main system drive. If you click on the C drive and choose settings, you’ll get the dialog box to set the amount of space.
For system restore, a value between 2% to 4% will be fine. The default 12% wastes loads and loads of space! I have mine set to 2% and even with that, I still have over 10 restore points to recover from if I needed to.
3. Delete temporary Internet Explorer files - Ahhh…if you like to browse the Internet hardcore like I do, then you MUST clean out your temporary files every once in a while or else it will take up lots of space. And again, as with the Recycle Bin and System Restore, we can set the max size for the amount of storage for temporary Internet files. And again, it’s set really high by default!
Open IE and go to Tools, Internet Options.
On the options dialog, under Browsing History, click on Settings.
Now here you can type in a value for the amount of space to be used!! When I first did mine, it was set to 1GB!!! So I had 1 whole GB of storage being used by temporary files that were never going to be used again anyway! Change that value to something very small like 25MB or even less if you like. After doing this, you should click Delete under the Browsing History section and delete all of the current data there.
4. Actually, there is a 4th thing you can do to get some disk space back! If you’re like most people, you probably use StandBy mode on your computer by simply closing the cover or pressing the power button. No one really uses Hibernate mode because why use that when you can use StandBy, which is easier and a lot faster! I personally have never used it and don’t think I ever will, but it takes up a good amount of space on your computer.
Go to Start, Control Panel and choose Power Options. If you are in Category view, click Switch to Classic View at the top left. Then click on the Hibernate tab in the Power Options dialog:
Make sure it’s unchecked. The hibernate feature takes up the amount of space equal to your RAM, so in my case I was wasting another 1GB of space!!!
Now you hopefully just saved yourself a couple of GB’s worth of space! Now you can last a little bit longer before having to move stuff off. If your computer is still running slow, check out my other articles on how to increase your computer’s performance in the Table of Contents at the top of the post!
Technorati Tags: increase computer speed, increase computer performance, save hard disk space, make computer faster, fix slow computerIf you enjoyed this post, make sure you subscribe to my RSS feed!
» Filed Under Computer Tips
Related Posts
- How to configure the Power Options for your laptop
- Simple ways to increase your computer’s performace - Configuring the paging file
- Backup your computer by making an image of your hard drive
- Tips for backing up your computer system and data files - Using the Windows Backup Utility
- Simple ways to increase your computer’s performace - Defragmenting your hard drive
Another way I’ve used to save space is to, “Squish” files
(this can be done natively in XP & up, for the older OS’s you need WinZip or some file “compression” utility)
1) find a folder with a ton of my files
go back to the other window and select all the files in it
2) rt click or hit the “context menu” key on the keyboard
3) select “new”
4) “compressed zipped folder”
5) name it to whatever the content will be ie BMP’s.zip, JPG’S.zip or just “ZippedUp.zip”
6) double click it or click and hit enter
7) a new “Explorer” window opens
9) rt click and hold while dragging the files to the other window
10) a little context menu asking if you want to copy or move the files, select move.
this creates a “single” file containing all those files within it thus saving wasted clusters for files that don’t use an exact cluster size ie
4096, 8192, 16384, 32768, 65536, etc.
if your files aren’t these sizes they waste space.
the good thing about the native XP “compressed zipped folders” is that the files in it are availible to open just by opening the folder as you would any folder in explorer and opening the file or draging the file to your application, and for the others like WinZip etc. you need to open it first but hey if it saves space it’s still worth it.
:Edit(add on)
Also, defrag the drive after “creating” and moving the files into the “compressed zipped folder”
Cheers
◄RfD►
Hey I have a question, is it safe to uncheck my Java during start up? will it mess my laptop? I am using Windows Vista btw.
I never knew that decreasing the recycle bin space will be useful.But another tip is also to defrag your disk and perform disk cleanup regularly.Good post.
Hi:
I heard that a way to save on the life of the hard drive is to turn the computer off only once a month or when you have to do updates. Otherwise, use Standby as much as possible. Is this true? Thanks.