How to move your mouse cursor without a mouse如何移動您的鼠標光標沒有鼠標

Posted on June 26, 2008 at 5:13 am張貼於2008年6月26日在上午05時13分

Recently I wrote an article on我最近寫了一篇文章,對 how to right-click using your keyboard 如何右鍵單擊使用您的鍵盤 and I hope it was useful.我希望它是有用的。 But maybe your computer mouse is broken, or you left it at your Grandma’s house during your last visit, or your touchpad simply isn’t working.但也許您的電腦鼠標,是打破了,或者你離開它在您的奶奶的家在您上次訪問,或您的觸控板根本不是工作。 Whatever the reason, I’ve found out how to move your mouse using the keyboard .不管是什麼原因,我發現了如何移動您的鼠標使用鍵盤

It started when I lost my mouse, normal computing became very difficult and web browsing was close to impossible - unless, that is, I was prepared to mash the ‘tab’ button on every page.它開始時,我失去了我的鼠標,正常的計算變得非常困難和Web瀏覽,是接近不可能的-除非,那就是我是準備土豆'標籤'按鈕在每個網頁上。

So, here it is, a way to move your mouse cursor without a mouse.所以,在這裡,這是一種方法提出你的滑鼠游標無鼠標。

Please check before you attempt to do this that you have a numeric keypad, as this is the only requirement for this. 請檢查之前,您試圖這樣做,你有一個數字鍵盤,因為這是唯一的要求這樣做。 A numeric keypard resembles this: 一個數字keypard類似於此:

數字鍵盤

Option 1: MouseKeys 選項1 : mousekeys

Okay, so, the first way of doing this, is by using a feature that is built in by windows, called MouseKeys .好吧,因此,第一種方式這樣做的,是通過使用一種功能,是建立在由Windows ,所謂mousekeys To turn on MouseKeys, go on Control Panel , click on Accesibility Options , click on the tab that says Mouse, and check the ‘ Use MouseKeys ‘ box.要打開mousekeys ,去控制面板 ,點擊accesibility選項 ,可點擊標籤說,鼠標,並勾選' 使用mousekeys '方塊。 Alternatively, you could turn on MouseKeys by pressing Left ALT + Left Shift + Num Lock at the same time.另外,您也可以把對mousekeys按下左Alt +左鍵+轉移的Num Lock在同一時間內。 Please note that this only works with the LEFT alt and shift, as if you try it with the right side, it will not work.請注意,這只會工程與左邊的ALT和轉移,如果您嘗試,它與右側,它將無法工作。

Here are the controls, provided that you have a numeric keypad, to run MouseKeys.這裡是管制,只要您有一個數字鍵盤,運行mousekeys 。

  • 2 = Move Down 2 =下移
  • 8 = Move Up 8 =向上移動
  • 4 = Move Left 4 =向左移動
  • 6 = Move Right 6 =向右移動
  • 7 = Move Diagonally Top Left 7 =動議角左上方
  • 9 = Move Diagonally Top Right 9 =動議角右上方
  • 1 = Move Diagonally Bottom Left 1 =動議角左下方
  • 3 = Move Diagonally Bottom Right 3 =動議角右下角
  • 5 = Simulate Mouse Single Left Click 5 =模擬鼠標左鍵點擊單
  • (+) = Simulate Mouse Double Click ( + ) =模擬鼠標雙擊
  • (-) = Simulate Mouse Right Click ( -) =模擬鼠標右鍵點擊
  • (*) = Simulate Both Mouse Buttons Click At Once ( * ) =模擬鼠標按鍵都按一次
  • If you’ve tried this, you may have noticed that the speed of the cursors is really slow.如果您嘗試這樣做,您可能已經注意到,速度的游標,實在是緩慢。 To speed this up, you just go into Settings , and change the speed.為了加快這個,你剛才進入設置 ,改變的速度。

    設置mousekeys

    Just drag the sliders along to the maximum speed and acceleration, and it should be absolutely fine.剛才拖動滑塊沿,以最高速度和加速度,它應該是絕對的罰款。

    Option 2: Mouse Emulator 選項2 :鼠標模擬器

    Mouse Emulator works in a very similar way to mouse keys, except I find it slightly better, as it has a better diagonal moving control than MouseKeys.鼠標模擬器工程,在一個非常類似的方式,以鼠標鍵,除我覺得稍好,因為它具有較好的對角線運動控制比mousekeys 。 It’sa small and free program, only 10kb, downloadable here這是小和自由的程序,只有10 KB ,下載在這裡 http://www.geocities.com/pronto4u/mouseemulator.html . It’sa simple, download and run program, so no installing needed.這是簡單,下載和運行程序,所以沒有安裝需要。

    Here are the controls for Mouse Emulator,這裡是控制鼠標模擬器,

  • 5 = Move Down 5 =下移
  • 8 = Move Up 8 =向上移動
  • 4 = Move Left 4 =向左移動
  • 6 = Move Right 6 =向右移動
  • 1 = Simulate Mouse Single Left Click 1 =模擬鼠標左鍵點擊單一
  • 2 = Simulate Mouse Right Click 2 =模擬鼠標右鍵點擊
  • 3 = Simulate Mouse Middle Click 3 =模擬鼠標點擊中
  • 7 - Mousewheel up (Scroll) 7 -m ousewheel(滾動)
  • 9 - Mousewheel down (Scroll) 9 -m ousewheel下跌(滾動)
  • CTRL + 0 - Enable/Disable Mouse Emulator按Ctrl + 0 -啟用/禁用鼠標模擬器
  • If you’re wondering where Mouse Emulator went after you ran the program, it should be in your toolbar, looking like this:如果您正在猶豫的地方鼠標模擬器到後,您運行程序,應該在您的工具欄上,看是這樣的:

    鼠標模擬器工具欄圖標

    So, there you have it, two clean and effective ways of using your computer, even if your mouse has died.所以,你有它,兩個清潔和有效的方法,使用電腦,甚至如果您的鼠標已經死亡。

    If you enjoyed this post, make sure you 如果您喜歡這個職位,請務必 subscribe to my RSS feed 訂閱我的RSS饋送 !

    » Filed Under »提交下 Cool Websites酷網站

    Related Posts相關文章

    Please post your comments/suggestions!請張貼您的意見/建議!