What to do with a blank screen after changing your computer’s display settings?怎樣做一個黑屏後，改變你的電腦的顯示器設置？

Posted on August 26, 2007 at 8:16 pm發布於2007年8月26日在下午8時16分

Having screen problems?有屏幕問題？ Recently changed your display’s resolution in Windows and now left with a blank or black screen which you can’t change back?最近改變你的顯示器的決議，在Windows ，現在只剩下一個空白或黑色畫面，你不能變回來？ It’s annoying when this happens!它的煩人的，在這種情況下！ It’s happened to me numerous times and I have to say that it’s quite terrible that Windows does not have a built-in mechanism to detect whether or not a monitor can support a particular resolution or refresh rate.它的發生在我無數次，我必須說，這是相當可怕的窗戶沒有一個內在的機制，以偵測是否不包括顯示器可以支持一個特別決議或刷新率。

Anyway, if you’re already in the situation and all you see is the BIOS loading, the Windows logo, and then the screen just goes blank once Windows starts to load, then there are two basic ways to get back to your original settings.無論如何，如果你已經在情況和所有你看到的是， BIOS的裝載， Windows標誌，然後在屏幕上剛剛雲空白，一旦Windows啟動加載，然後有兩種基本的方法，以回到原來的設定。

  1. Connect computer to a more advanced monitor - One way to see everything again is to simply connect the computer to a monitor that can support a higher resolution. 連接電腦，以更先進的監測 -單程看到的一切又是簡單電腦連接到監視器，可以支持更高的分辨率。 So if you have an old 15 inch monitor and it can’t display 1600×1200, connect the monitor to a newer screen, log into Windows and change the display settings back to what is was originally.因此，如果你有老的15寸液晶顯示器，它也不能完全顯示1600 × 1200 ，連接監控提升到一個新的畫面中，登錄到Windows和改變顯示設定回什麼是原本。
  2. Start the computer in Safe Mode - The second way to get back your original display settings is to start up in Safe Mode, which basically loads Windows in a stripped down state. 啟動電腦在安全模式-第二條路，以找回你原來的顯示設置，是開始了在安全模式下，基本上負荷窗口中剝離下來。 Safe Mode loads up at a lower resolution and therefore allows you to log in and change the settings back.To start up in Safe Mode, you simply press and hold the F8 key when the computer starts to boot up.安全模式負載了在一個較低的決議，因此可以讓你登錄並更改設置back.to啟動了安全模式，你只要按住F8鍵關鍵的時候，電腦啟動開機。 This is usually when you see the manufacture’s logo and the BIOS being loaded.這通常是當你看到製造的標識和BIOS的正裝。 Once you press F8, you’ll be presented with a set of options as shown below:一旦你按下F8鍵，你會得到一個設置的選項，如下圖所示：

Go ahead and select Safe Mode.繼續進行，並選擇安全模式。 If for some reason Safe Mode does not work, you can also try selecting Enable VGA Mode .如果因為某種原因，安全模式是行不通的，你也可以嘗試選擇，使VGA模式 。 Enable VGA Mode can also be useful for situations where you try to extend your desktop onto another monitor or select another monitor to use as your primary monitor.使VGA模式也可以是有益的情況下，你設法延長你的桌面上的另一個監視器或選擇另一個顯示器使用，因為您的主要監視器。

The problem that can sometimes occur there is that Windows sends the signal to a different port than where you have your external monitor connected and it will therefore give you the blank screen whenever it loads up.這個問題，可以有時會發生有就是窗戶發出了信號，以一個不同的端口，比你有你的外置顯示器相連，因此，它將給你黑屏時，它負載了。 Again, Windows does not automatically detect that there isn’t monitor connected and revert back to it’s original settings!再次， Windows不自動偵測有沒有監控連接，並回复到它原來的設置！

Now that you’re in Windows, you can change the resolution or refresh rate by right-clicking on the Desktop, choosing Properties and clicking on the Settings tab.現在您要在視窗中，你可以變更決議或者刷新率鼠標右鍵點擊桌面，選擇屬性 ，並點擊設定標籤。

For screen resolution, move the slide bar over to the LEFT.對於屏幕的分辨率，移動幻燈片酒吧向左側。 This will lower the resolution and allow your monitor to display Windows correctly.這將降低該決議，並讓您的顯示器顯示Windows正確。 If the refresh rate is too high, click on the Advanced button and then click on the Monitor tab.如果刷新率是太高，點擊高級按鈕，然後點擊監視器標籤。

Here is also where you can change back your primary monitor to 1 if 2 gave you a blank screen.在這裡，您還可以改變返回自己的主監測到1如果2給你一張空白畫面。 Also, you can uncheck the extend my desktop option.此外，你還可以勾選延長我的桌面選項。

From the drop down, choose a lower value for the screen refresh rate. 從下拉，選擇一個較低的值為屏幕刷新率。 Go ahead and reboot your computer normally and everything should load up fine. 強行重新啟動你的電腦通常都應該負載了罰款。

Remember, in Windows, when you change your display settings, always click APPLY first. 請記住，在Windows中，當你改變顯示設定，請務必點擊申請首次。 If you simply click OK , you won’t get the dialog shown below whereby Windows will revert back to the original settings if you don’t answer within 15 seconds. 如果你簡單地單擊OK ，你不會得到如下所示的對話框中，讓Windows將回复到原來的設置，如果你不回答15秒。

When you click Apply, Windows will change the display to what you chose, in which case the screen will go black or blank if it can’t support it.當你點擊應用， Windows會改變顯示器，你的選擇，在這種情況下，屏幕將黑色或空白，如果不能夠支持。 However, this dialog will be up and if you don’t click on anything, it will revert back to the original settings!不過，此對話框將起來，如果你不點擊任何東西，它會回复到原來的設置！ So you won’t have to waste time going through Safe Mode, etc, etc.所以你可以不須浪費時間去通過安全模式，等等，等等。

Any questions, post a comment!任何問題，張貼一條評論！

Technorati Tags: Technorati標記： , ， , ， , ， , ， , ， , ，

If you enjoyed this post, make sure you 如果你喜歡這個職位，請務必 subscribe to my RSS feed 訂閱我的RSS饋送 ! ！

» Filed Under »提起下 Computer Tips電腦竅門

Related Posts相關職位

Please post your comments/suggestions!請您評論/建議！