How to record cassette tapes to PC/Computer如何記錄錄音帶,以電腦/電腦

Posted on March 6, 2008 at 6:44 am發布於2008年3月6日,在上午06時44分

So you have a bunch of old audio cassettes that you want to copy or transfer to your computer ?所以你有一大堆的舊錄音帶說,你想複製或轉移到你的電腦嗎? There are many programs out there that you can buy which will help to try and make the process as simple as possible!有許多程式在那裡,你可以買到這將有助於盡量使這一過程盡量簡單! However, since I’ma techie and my blog is all about easy to understand computer tips, I’m going to try and teach you how you can transfer audio cassettes to your computer for free!不過,由於我是技術應用和我的博客全是很容易理解的計算機提示,我會盡量教你如何你可以轉讓,錄音帶複製到您的電腦免費!

What you’ll need before you can copy cassettes to your computer or PC:什麼你需要之前,你可以將其複製盒帶到您的電腦或電腦:

1. 1 。 Audacity 竟敢 - Free recording and editing software -免費錄製和編輯軟件

竟敢

2. Cassette Tape Deck with RCA output jacks 2 。 錄音帶甲板帶有RCA輸出插孔

盒式磁帶甲板

3. Stereo RCA cable with mini-jack connector 3 。 立體聲的RCA電纜與迷你插孔連接器

立體聲的RCA插孔

4. Sound card with line-in jack (usually in blue) 4 。 音效卡與線在傑克(通常為藍色)

線傑克

Step 1: Connect tape deck to computer第1步:連接磁帶到甲板上的計算機

The first thing you’ll need to do in order to record the audio from a cassette tape is to connect the tape deck to the computer itself.第一件事,你需要做的,以便記錄音頻從錄音帶等,是連接磁帶到甲板上的電腦本身。 You’re going to need the Stereo RCA cable with mini-jack for this step.你要去需要立體聲的RCA電纜與迷你插孔為這一步。

Go ahead and connect the male RCA side of the cable (red and white) into the female RCA connectors on the tape deck.繼續和連接的RCA男一邊的電纜(紅色和白色)進入女性的RCA連接器上的磁帶甲板。 Make sure that the RCA jacks on the tape deck say “ Line Out ” or “ Audio Out “.確保了RCA插座上的磁帶甲板說: " 線"或" 音頻"方式。

卡式甲板上的輸出線

Now it’s time to connect the other end of the cable to your computer.現在,它的時間去另一端連接到有線到你的電腦。 If you’re using the RCA cable with mini-jack connector on the other end, then simply plug it into the female Line-In jack on the back of your computer (the blue one out of the three).如果您使用的RCA電纜與迷你插孔連接器上的另一端,然後乾脆把它插入到女性的線在千斤頂上回你的電腦(藍一列的3個) 。 However, if you have an RCA cable that has red and white RCA connectors on both ends, you’ll need to buy a mini-jack stereo adapter shown below.但是,如果你有一個RCA的電纜已紅色和白色的RCA接頭兩端,你需要購買一個迷你插孔音響轉接器,如下圖所示。

迷你插孔立體聲適配器

However, if you’re going to be buying this, you may as well buy a cable with the mini-jack already on the other end!不過,如果你打算購買的話,您還不如買一個有線與迷你插孔已經在另一端! Using an adapter may cause a loss of audio quality.用一個適配器可能造成的損失音頻質量。

線

If you’re using a Dell, it should be color coded, which makes it much easier to figure out where to connect it to.如果您使用的是戴爾,它應該顏色編碼,這使得它很容易揣摩出,以將它連接到。 Basically, it’s the blue colored jack that is your Line In.基本上,它的藍色傑克這是你們的路線。

Step 2: Record audio from cassette tape using Audacity第2步:音頻記錄,從卡式磁帶用厚顏無恥

Now that you have your cassette tape deck connected to the computer, we can use the open-source audio recording and editing software Audacity to capture the audio.現在你有你的錄音帶橋面連接到電腦,我們可以利用開放源代碼音頻錄製和編輯軟件厚顏無恥地捕捉音頻。

Firstly, open Audacity and click on Edit and then Preferences way at the bottom.首先,開放式竟敢並點擊編輯 ,然後再優惠方式處於低谷。 If it’s not already there, click on Audio I/O in the left hand menu.如果不是已經有,請點擊音頻輸入/輸出 ,在左手菜單。 This is where you can select the Input Source that you want to record sound from.這是你可以選擇的輸入源說,你要錄製的聲音。 You should see a section heading called Recording and under that a drop down menu called Device .你應該可以看到有一節標題中所謂的記錄和下一個下拉菜單,所謂的裝置

竟敢喜好

Make sure that you do NOT pick Microsoft SoundMapper if you’re on a Windows machine.確保您微軟soundmapper如果您在Windows機器。 It should be something similar to what you see above or something like “ Line-In:Realtek HD Device “, etc. You can try all of the options in the drop down until you actually get the sound to record, one of them will work.它應該是類似你所看到的上述或類似的東西, " 線:了Realtek高清裝置 "等,你可以嘗試所有的選項,在下拉,直到你實際上得到了良好的紀錄,其中一人將工作。

Now you simply need to adjust the volume for your recording by clicking on the downward pointing arrow on the right hand (red) VU recording level meters.現在您只需要調節音量,為您的錄音通過點擊向下的箭頭指向上,右手(紅色)似曾相識錄音一級米。

紀錄良好

Now click on Monitor Input or Start Monitoring .現在點擊監控投入開始監測 Now when you begin recording by clicking the Record button, if you see the sound is going too far to the right (red bars), then you can adjust the input volume level by dragging the slider to the left in the Mixer Toolbar (which is slightly lower and to the left of the recording levels meters.現在當你開始錄製點擊記錄按鈕,如果您看到的聲音是太出格到右(紅酒吧) ,然後你可以調整輸入音量通過拖動滑塊左側,在攪拌機工具欄(這是略低,並在左邊的錄音水平米。

輸入音量[ 6 ]

When you are finished recording, go ahead and click the Stop button (yellow color) and go to File and choose Save Project As .當你完成錄音時,繼續進行,並點擊停止按鈕(黃色) ,並前往文件,並選擇保存項目 This is will save it as a Audacity project so that you can come back and edit it later.這是將其保存為竟敢項目,讓你可以回來,並編輯它。

To export the final edited version of your recording to MP3 or WAV format, click on File and choose Export As .出口的最終剪輯版的自己的錄音,以MP3或WAV格式,點擊文件並選擇出口 You can then take these MP3s and burn them to CD or import then into iTunes.然後你可以考慮這些MP3和刻錄到CD或進口,然後到iTunes 。 You can choose between WAV, AIFF, OGG, FLAC, and MP2 format for exporting.您可以選擇WAV等,格式, ogg , Flac的,和MP2格式用於出口。

Remember you can always pause the recording at any time if there are parts of the cassette tape you don’t want transferred to your computer.記住,你可以隨時停下來錄製,在任何時候,如果有部分錄音帶,你不想轉移到你的電腦。 Otherwise, you should now a digital version of your audio cassettes!否則,你現在應該數位版本的錄音帶! If you have a question, post a comment!如果你有一個問題,後一個評論! Enjoy!享受!

Technorati Tags: Technorati標記: , , ,

If you enjoyed this post, make sure you 如果你喜歡這個職位,請務必 subscribe to my RSS feed 訂閱我的RSS饋送 !

» Filed Under »提起下 Computer Tips電腦竅門

Related Posts相關職位

2 Responses to “How to record cassette tapes to PC/Computer”二反應" ,如何記錄錄音帶,以電腦/電腦"

  1. P.Kandaswamy said on : 體育kandaswamy說:

    A very good guide useful for beginners like me.是一個很好的引導有用的初學者和我一樣。


  2. akishore akishore said on : 說:

    Hi, I’m glad the article helped.喜,我很高興這篇文章有幫助。 Were you able to convert your audio cassette tapes to CD or get them onto your computer?你可以轉換你的音頻磁帶到CD或讓他們到你的計算機嗎?


    Please post your comments/suggestions!請您評論/建議!