Manières simples d'augmenter le performace de votre ordinateur - configuration du dossier de pagination
Signalé le 15 mars 2007 chez 12:00 P.M.
Veillez à lire d'autres poteaux de la série de performances d'ordinateur d'augmentation !
- Manières simples d'augmenter le performace de votre ordinateur - configuration du dossier de pagination
- Manières simples d'augmenter le performace de votre ordinateur - Defragmenting votre commande dure
- Manières simples d'augmenter le performace de votre ordinateur - arrêt des programmes de démarrage !
- Manières simples d'augmenter vos performances de l'ordinateur - économiser l'espace de disque dur !
- Des manières simples d'augmenter le performace de votre ordinateur - tournez classer au loin sur vos commandes locales
- Des manières simples d'augmenter vos performances de l'ordinateur - neutralisez les effets visuels en étiquette d'options d'exécution
Si votre ordinateur a commencé à ralentir après plusieurs mois d'utilisation, là un couple des changements mineurs que vous pouvez faire à vos arrangements qui aideront à augmenter l'exécution de votre ordinateur. Tordre Windows est essentiel pour obtenir l'exécution maximum pour votre ordinateur. Même sur un ordinateur rapide, si les arrangements sont incorrects, l'ordinateur exécutera mal.
Arrangements de mémoire virtuelle :
La mémoire virtuelle pour votre ordinateur est l'espace d'entraînement dur employé par Windows quand elle remplit la RAM physique. Disons que vous avez un ordinateur qui a 256MB de RAM et vous courez plusieurs applications immédiatement qui pourraient avoir besoin d'un total de 400MB de mémoire. Windows remplira le 256MB et emploiera alors l'espace libre sur la commande dure pour stocker le repos. Ceci s'appelle le dossier de pagination ou la mémoire virtuelle et le Windows augmenteront et diminueront la taille de ce dossier à mesure que nécessaire. L'inscription au disque prend beaucoup plus longtemps que l'écriture à la RAM physique, ainsi quand Windows emploie le dossier de pagination, les performances d'ordinateur dégradent.
C'est pourquoi vous entendrez toujours des personnes demander s'il y a assez de RAM parce que plus la RAM que vous avez, plus vos performances de l'ordinateur seront meilleures. Cependant, nous pouvons tordre les arrangements de mémoire virtuelle également de sorte que le dossier de pagination n'obtienne pas réduit en fragments et de sorte que Windows ne doive pas se développer ou rétrécir la taille du dossier de pagination, qui fera ralentir l'ordinateur, particulièrement sur des machines plus anciennes.
Par défaut, Windows emploie la cloison d'initialisation (la cloison qui contient vos dossiers de logiciel d'exploitation) et on lui recommande de placer la taille à 1.5 fois la quantité de RAM que vous avez.
Pour changer les arrangements de mémoire virtuelle, allez commencer, panneau de commande et clic dessus Système. Click on the Advanced tab and under the Performance box, click Settings.
On the Performance dialog, click the Advanced tab and then click Change under the Virtual Memory heading.
Now you’ll see the Virtual Memory settings as shown below:
Here are the rules for setting your paging file correctly:
To get the best performance it is best to create a paging file on a different partition than the boot partition (the drive that contains that operating system, which is usually the C drive) and to also create it on a separate hard drive. In this way, Windows can handle more I/O requests because the paging file will not have to compete with the system folder that needs to be constantly accessed as Windows runs.
The only problem with completely moving the paging file off the boot partition is that Windows uses the page file to write out debug info in case your computer crashes with blue screen of death STOP error. This is important for machines that have critical data, but for the average user, this is not a big deal. If you get the blue screen of death, it’s not an easy process at all to get to read the file and even if you can, it can be quite complex. But if you have enough space, then you can leave the paging file there.
So the best solution is to create on paging file on the boot partition that will take care in case of a crash and create another paging file on a separate partition on a DIFFERENT hard drive preferably. If you only have one hard drive on your computer, then just create another paging file on a different partition. Windows automatically uses the paging file that is on the less accessed partition using an internal algorithm.
Even more ideal would be if you could put the paging file in it’s own partition with no other data. This ensures that the paging file will never become fragmented and hence performance will be better. If it’s on a drive that has other data and the paging file must be expanded, and if there is other data in the way, the file will become fragmented.
Another way to reduce fragmentation of the paging file is to set the initial and maximum sizes to the same number. What this does is ensure that the file does not grow or shrink and therefore will not fragment. However, you should defragment the hard drive before doing this to ensure the paging file is all together on the hard drive.
So if you have only one partition, set the initial and maximum sizes to 1.5 times the amount of RAM you have. If you have more than one partition, select the boot partition and set the initial and max to 250MB. The reason for this is because it’s better to create another paging file on the other partition and create one paging file on the boot partition that’s just big enough for the mini dump file, which is 250MB.
On your second partition, select Custom Size and set the initial and maximum values to 1.5 times the amount of physical RAM you have. You can determine the amount of RAM you have by going to Start, Control Panel, and click System. You’ll see the amount of RAM at the bottom right.
Hope this article helped you! Please feel free to comment!
» Filed Under Computer Tips
 Save this page |
 Stir it up on Mixx |
|
 Add to Reddit |
 Stumble this page |
Related Posts
- Tweak the Windows Vista page file size
- Create a Virtual Machine with VirtualBox
- How to move or change the location of My Documents folder
- Simple ways to increase your computer’s performance - Save hard disk space!
- How to set active partition in Vista and XP
Hi, I’ve tried doing all that you mentioned to increase my speed and increase my paging file. (I keep getting notices that I have no paging file) When I go through the steps, I’m showing that I’m adding a paging file (of 1536 mb), but after I re-start, it shows 0 mg. I’ve disabled everything on start-up as well, but it still takes a lot of time to boot. Can you help me. I no longer have a tech dept to support me, since I’ve retired. Thank you & God Bless, Walker
How do I set up a paging file on the boot system? How do I set up a paging file on my D hard drive? w.
nice article
Dear,
It’s a useful article that you have published. Thanks for that.
My situation is different. I have 4GB of RAM and I do not want to use PAGE FILE. I assume 4GB is enough for my WinXP to consume. What is your opinion : Should I stop using page file or I keep a 6GB of page file?
A reply will be apprecaited.
Regards,
Mehdi Anis
It is not neccessary to have a paging file as long as your system has enoughh pysical ram available. e.g.: if you have 2 gig of pysical ram installed and your system uses a max of say 1.2 gig of ram you can quite safely turn paging file off. The 1.5 x the amount of system RAM rule is very outdated -it was introduced with windows 3.1 when the average amount of RAM installed was around 128MB.
You do NOT need a paging file if you have plenty of physical RAM installed.
Hi,
I turned off using page file. Still, in Windows Task Manager’s Perofromance Tab, I see PF Usage 1.xGB.
As far as I know this ‘PF Usage’ shows amount of page file used. If I already turned off page file, how come it is showing 1.x GB of page file use?
Any idea? Thanks.
That’s an M$ error. PF usage is actually refering to the amount of RAM your system is using. A mistake M$ never bothered to fix.
i found a much easier way to tweak your computer, it helped mine a lot,
http://www.metacafe.com/watch/....._for_free/
Nice post, thanks for the info
Hi there I am an intern at an IT company in South africa and I have to better the perfomance of a PC i have been assigned to work on and the maths behind having to set the initial size of the paging file to 1.5 times the size of RAM is a bit difficult for me to understand. Plaese advise me!
For instance the PC I am working on has 1.11 GB of RAM.
I have 480mb of RAM and i cant do my gaming. im 14 and ive read all ur articles on increasing computer performance and i just deleted one of my accounts with 3.2gb and its speeded up my comp thnx.
how do you create a second page file on the d: drive.
Todd, you can create a second page file in Windows by right-clicking on My Computer, choosing Properties, click on the Advanced tab, click on Settings under Performance, click on Advanced tab again, and then click Change. Now click on the D drive letter and choose the Custom size radio button.
Is it possible to create a paging file on an external HDD and if yes, would it make sense at all?