Restore missing Run command in Windows XP Restore fehlt Run-Befehl in Windows XP

Posted on September 30, 2008 at 5:25 am Geschrieben am 30. September 2008 bei 5:25

The Run command missing from the Start Menu in Windows XP? Dem Befehl "Ausführen" fehlt aus dem Startmenü in Windows XP? If so, you may be the victim of over-zealous IT administrators! Wenn ja, können Sie möglicherweise das Opfer von Über-eifrige IT-Administratoren! Using what is called Group Policy, they can remove the run command from the Start Menu and there’s very little you can do to get the original one back. Mit so genannten Group Policy, sie entfernen können dem Befehl "Ausführen" aus dem Startmenü und es gibt sehr wenig können Sie tun, um das Original wieder ein.

However, that does not mean all is lost! Allerdings, das bedeutet nicht, alles ist verloren! When you’re talking about computers, there is always a workaround! Wenn Sie sprechen von Computern, es gibt immer eine Lösung! So if your Start Menu looks like this with no Run command, Also, wenn Sie aus dem Start-Menü sieht wie folgt aus ohne Run-Befehl,

run command missing

then you can still get a Windows Run box using some dann kannst du immer noch ein Windows-Run-Box mit einigen free tools out on the Internet kostenlose Tools auf dem Internet . Of course, your IT Admin will not like this, but too bad! Natürlich, Ihre IT-Admin wird nicht davon, aber zu schlecht!

RunMimic RunMimic is tiny little freeware application that looks just like the Windows Run command and works almost exactly like it also. ist kleines Freeware-Anwendung, sieht aus wie der Windows-Befehl ausführen und arbeitet fast genau wie es auch. The most common commands that I use on a daily basis, such as regedit, msconfig, cmd, control, services.msc, etc all work perfectly! Die am häufigsten verwendeten Befehle, die ich benutze auf einer täglichen Basis, wie Sie regedit ein, Sie msconfig ein, cmd-, Steuer-, services.msc ein, etc alle Arbeiten perfekt!

missing run command

You can even type in network shares like Sie können sogar Art in Netzwerk-Freigaben wie \\servername\sharename \ \ Servername \ Freigabename and access network resources. Zugang und Netzwerk-Ressourcen. The great thing about the program is that it runs just by opening the EXE file, no install necessary, hence you can take it with you on a USB drive in case someone’s computer is locked down. Das Tolle an dem Programm ist, dass es läuft einfach durch Öffnen der EXE-Datei, keine Installation erforderlich, damit Sie ihn bei sich tragen können über ein USB-Laufwerk für den Fall, jemand der Computer gesperrt ist down.

The only issue with RunMimic is that it requires that you install the .NET Framework, which is kind of a high requirement. Das einzige Problem mit RunMimic ist, dass es erfordert, dass Sie bei der Installation der. NET-Framework, das ist eine Art hohe Anforderung. Most computers will have this, but not all necessarily. Die meisten Computer haben wird, aber nicht alle unbedingt.

That’s when you can check out Das ist, wenn Sie können herausfinden, Run Dialog Replacement Ausführen-Dialog Ersetzung , a replacement for the Windows Run dialog without the need for .NET. , Ein Ersatz für die Windows Ausführen-Dialog, ohne die Notwendigkeit für. NET.

xp run command missing

Both of these programs work great and will allow you to use most of the normal Windows Run commands. Beide von diesen Programmen lassen sich gut und erlauben Ihnen zu verwenden die meisten der normalen Windows-Befehle ausführen. So if your Run command is missing or you cannot access the Run command, no problem, just download either of these two programs and regain access to the registry, msconfig, Also, wenn Ihr Ausführen Kommando fehlt, oder Sie können keinen Zugriff auf den Run-Befehl, kein Problem, dann laden Sie entweder von diesen beiden Programmen und den Zugriff auf die Registrierung, Sie msconfig ein, the command prompt der Eingabeaufforderung , Control Panel applets, and lots more. , Control Panel-Applets, und vieles mehr.

Also, check out my post on NirCmd, a free tool that Auch finden Sie in meinem Post über NirCmd, ein freies Werkzeug, extends the functionality of the command prompt erweitert die Funktionalität der Eingabeaufforderung . Enjoy! Genießen! Source: Quelle: DownloadSquad

Enjoyed this post? Genossen diesem Post? Subscribe to Online Tech Tips via Abonnieren Sie den Online-Tech Tipps über RSS Feed RSS-Feed or via oder über Email E-Mail and receive free daily productivity tips. und Sie erhalten täglich kostenlos Produktivität Tipps.

» Filed Under »Gespeichert unter Computer Tips Computer-Tipps

Add to Delicious Save this page Speichern Sie diese Seite Mixx es Stir it up on Mixx Rühren Sie es auf Mixx
Reddit Add to Reddit Add to Reddit StumbleUpon Stumble this page Stumble dieser Seite

Related Posts Verwandte Beiträge

One Response to “Restore missing Run command in Windows XP” Eine Antwort auf "Wiederherstellen fehlt Run-Befehl in Windows XP"

  1. PvPTime said on : PvPTime sagte am:

    If you have missing RUN… No need you just can open notepad write >>> command.com <<> Save As <<>> RUN.bat <<< save and just open… Wenn Sie fehlende RUN ... Nr. brauchen Sie nur öffnen kann Merkzettel schreiben>>> command.com <<> Speichern unter <<>> run.bat <<<speichern und öffnen ...


    Please post your comments/suggestions! Bitte posten Sie Ihre Kommentare und Vorschläge!