How to fix "Missing or corrupt NTFS.sys" error in Windows XP Cómo arreglar "Desaparecidos o corruptos NTFS.sys" error en Windows XP

Posted on May 20, 2008 at 5:38 am Publicado el 20 de mayo de 2008 a 5:38 am

One of my XP SP2 computers at home crapped out today with the error “ Missing or corrupt Ntfs.sys ” and would not get past the initial BIOS screen. Uno de mis XP SP2 computadoras en su casa crapped a cabo hoy con el error "Falta Ntfs.sys o corruptos" y no pasar la pantalla inicial del BIOS. I eventually got it back up and running without having to format the computer, but it took a little while and it wasn’t super straightforward. He llegado de nuevo en marcha y funcionando sin tener que formatear el ordenador, sino que tomó un poco de tiempo y no es super sencillo. So if you are getting this error, here are the steps you can take to fix it. Por lo tanto, si usted está recibiendo este error, aquí son los pasos que puede tomar para solucionarlo.

The exact error message that you get from Windows is: El mensaje de error exacto que usted obtiene de Windows es la siguiente:

Windows could not start because the following file is missing or corrupt: System32\Drivers\Ntfs.sys Windows no puede iniciarse porque el siguiente fichero se encuentra o está dañado: System32 \ Drivers \ Ntfs.sys

When you do a search in Google for ntfs.sys is missing or corrupt, the first result is from Microsoft Support. Cuando usted hace una búsqueda en Google para ntfs.sys se encuentra o está dañado, el primer resultado es de soporte técnico de Microsoft. In particular, it states you might get this message when you convert your hard disk from FAT to NTFS. En particular, se establece que puede llegar este mensaje al convertir su disco duro de FAT a NTFS. That was not the case in my situation. Ese no es el caso en mi situación. I tried to run defragmenter and it froze in the middle. Traté de correr y de desfragmentación que congeló en el centro. After restarting, I got this message. Después de reiniciar, me dio este mensaje.

I’ll explain their method first (which did not work for me) and then two other methods to fix this issue. Voy a explicar su método de primera (que no funcionó para mí) y luego otros dos métodos para arreglar este problema.

Use the Recovery Console to replace Ntfs.sys Utilice la consola de recuperación para reemplazar Ntfs.sys

Pop in your CD into the computer and boot off the CD when prompted to “ Press any key to boot from CD “. Pop en su CD en el ordenador y arrancar el CD cuando se le pida a "Pulse cualquier tecla para arrancar desde CD". When the Welcome  screen appears, press R to select the To repair a Windows XP installation using Recovery Console, press R option. Cuando la pantalla de bienvenida aparece, presione R para seleccionar el Para reparar una instalación de Windows XP utilizando la Consola de recuperación, presione R opción.

reparación de instalación

Next, type the number for the installation you want to logon to from the Recovery Console. A continuación, escriba el número para la instalación que desea acceder al de la Consola de recuperación. You’ll also need to know the administrator password in order to get to the command prompt. Usted también necesita saber la contraseña del administrador con el fin de llegar a la línea de comandos.

recuperación Consol

Now that you are at the command prompt, you need to enter in the following DOS commands, pressing Enter after each one: Ahora que usted está en la línea de comandos, es necesario introducir en los siguientes comandos de DOS, al pulsar Intro después de cada uno:

cd \windows\system32\drivers cd \ windows \ system32 \ drivers
ren ntfs.sys ntfs.old Ren ntfs.sys ntfs.old

This basically renames the current ntfs.sys file to something else so that we can replace it with a new one that hopefully is not corrupted. Esto básicamente cambia el nombre del archivo ntfs.sys actual a otra cosa a fin de que podamos sustituirlo por uno nuevo que esperemos que no esté dañado. Now type in the following command: Ahora escribe en el siguiente comando:

copy cd :\i386\ntfs.sys drive :\windows\system32\drivers copia cd: \ i386 \ ntfs.sys unidad: \ windows \ system32 \ drivers

Where cd is the drive letter for the CD-ROM drive that has you Windows XP CD, and drive is the drive where you installed Windows XP (most likely C:). En caso de que cd es la letra de la unidad de CD-ROM que tiene usted Windows XP CD, y unidad es la unidad donde haya instalado Windows XP (probablemente C:).

That’s it! Eso es todo! Now go ahead and remove the CD and type quit . Ahora seguir adelante y eliminar el tipo de CD y dejar de fumar. Go ahead restart your computer and see if you are able to log back into Windows! Vaya por delante, reinicie el ordenador y ver si están en condiciones para volver a iniciar sesión en Windows!

Fix Ntfs.sys error by using CHKDSK Fix Ntfs.sys error mediante el uso de CHKDSK

For some reason the above-mentioned method did not work for me! Por alguna razón el mencionado método no funcionó para mí! I think it was because the file itself was not an issue, but that there were some problems with the hard drive itself. Creo que fue porque el propio archivo no era un problema, pero que había algunos problemas con el disco duro. So after trying to copy the new Ntfs.sys file from the CD and that not working, I thought I would try to run CHKDSK . Así que después de tratar de copiar el nuevo archivo Ntfs.sys desde el CD y que no funciona, yo pensé que trata de ejecutar CHKDSK.

You can run CHKDSK from the Recovery Console itself. Se puede ejecutar CHKDSK desde la consola de recuperación. So you would follow the same instructions as mentioned above, but instead of typing in the three DOS commands above, you would type in the following at the command prompt: Por lo tanto, debería seguir las mismas instrucciones como se mencionó anteriormente, pero en vez de escribir en los tres comandos de DOS anterior, debería escribir a la siguiente en la línea de comandos:

CHKDSK /R CHKDSK / R

The /R is a command line switch that says to repair any errors that are found on the hard disk automatically. El / R es un conmutador de línea de comandos que dice que para reparar los errores que se encuentran en el disco duro automáticamente. CHKDSK can take quite some time to run, so be ready to wait. CHKDSK puede tomar bastante tiempo para correr, por lo que estaría dispuesta a esperar. It took about 30 minutes on my computer. Se tardó unos 30 minutos en mi equipo.

Luckily for me, there were several errors on the disk and CHKDSK fixed them all. Afortunadamente para mí, hubo varios errores en el disco y CHKDSK fijo a todos. I restarted the computer and Windows loaded fine, no missing ntfs.sys error! Me reinicia el ordenador y Windows cargado multa, no faltan ntfs.sys error!

chkdsk

Repair Ntfs.sys by doing a repair install of Windows XP Reparación Ntfs.sys de hacer una reparación de instalación de Windows XP

If none of the above-mentioned methods worked, you can try to do a repair install of Windows XP, which basically replaces all of the Windows system files. Si ninguno de los mencionados métodos de trabajo, se puede intentar llevar a cabo una reparación de instalación de Windows XP, que básicamente reemplaza todos los archivos de sistema de Windows. Your applications and settings will remain intact, but you will have to reapply all Windows updates. Sus aplicaciones y la configuración permanecerá intacta, pero usted tendrá que solicitar de nuevo todas las actualizaciones de Windows.

Doing a repair install is pretty easy, the starting steps are the same as for getting into the Recovery Console, but instead of pressing R to repair, you press Enter to setup Windows. Hacer una reparación de instalación es bastante fácil, la puesta en marcha medidas son las mismas que para entrar en la Consola de recuperación, pero en lugar de pulsar R para reparar, presione Enter para la configuración de Windows.

la configuración de Windows

Then you simply select the installation you want to repair and press R to start the repair. A continuación, usted sólo tiene que seleccionar la instalación que desea reparar y presione R para iniciar la reparación.

reparación de instalación

Note that it may look like Windows is actually re-installing a fresh copy of itself, but this is not the case! Tenga en cuenta que pueden ver como Windows es realmente volver a instalar una nueva copia de sí mismo, pero este no es el caso! You’ll see the install screens like if you were to do a fresh install, but don’t worry, you’ll still have all of your applications, settings, and data. Verá la instalación de pantallas como si estuviera a hacer una nueva instalación, pero no se preocupe, usted aún tiene todas las aplicaciones, los ajustes y datos.

Hopefully you now have a working computer! Esperemos que ahora tienen un equipo de trabajo! If you are getting stuck somewhere, etc, post a comment and I’ll try to help you out! Si usted está recibiendo atascado en algún lugar, etc, publica un comentario y yo intentaré ayudarle! Good luck! Buena suerte!

Technorati Tags: Technorati Tags: , , , ,

If you enjoyed this post, make sure you En caso de que haya disfrutado de este puesto, asegúrese de que subscribe to my RSS feed suscribirse a mi feed RSS ! !

» Filed Under »Presentadas en virtud de Computer Tips Computer Tips

Related Posts Puestos relacionados

2 Responses to “How to fix "Missing or corrupt NTFS.sys" error in Windows XP” 2 Responses to "¿Cómo fijar" Desaparecidos o corruptos NTFS.sys "error en Windows XP"

  1. Shoban Shoban said on : dice:

    How did you take screenshots? ¿Cómo tomar capturas de pantalla?


  2. Marco said on : Marco dice:

    Looks like it was running on some “virtual computer”… very interesting article, by the way! Parece que estaba corriendo en algunos "equipo virtual"… muy interesante el artículo, por cierto! Hope I’ll never it… Espero que nunca…


    Please post your comments/suggestions! Por favor envie sus comentarios o sugerencias!