How to fix "Missing or corrupt NTFS.sys" error in Windows XP Beheben des Problems "fehlt oder beschädigt ist Ntfs.sys" Fehler in Windows XP

Posted on May 20, 2008 at 5:38 am Gesendet am 20. Mai 2008 um 5:38

One of my XP SP2 computers at home crapped out today with the error “ Missing or corrupt Ntfs.sys ” and would not get past the initial BIOS screen. Einer meiner XP-SP2-Rechner zu Hause crapped heute mit dem Fehler "fehlt oder beschädigt ist Ntfs.sys" und würde nicht vorbei an der ersten BIOS-Bildschirm. I eventually got it back up and running without having to format the computer, but it took a little while and it wasn’t super straightforward. Ich bekam er schließlich wieder zum Laufen, ohne zu formatieren Sie den Computer, aber es dauerte eine kleine Weile, und es war nicht einfach super. So if you are getting this error, here are the steps you can take to fix it. Also, wenn Sie diese Fehlermeldung bekommen, sind hier die Schritte können Sie es beheben könnte.

The exact error message that you get from Windows is: Die genaue Fehlermeldung, die Sie von Windows ist:

Windows could not start because the following file is missing or corrupt: System32\Drivers\Ntfs.sys Windows konnte nicht gestartet werden, da die folgende Datei fehlt oder beschädigt ist: System32 \ Drivers \ Ntfs.sys

When you do a search in Google for ntfs.sys is missing or corrupt, the first result is from Microsoft Support. Wenn Sie eine Suche auf Google nach ntfs.sys fehlt oder beschädigt ist, das erste Ergebnis ist von Microsoft Support. In particular, it states you might get this message when you convert your hard disk from FAT to NTFS. Insbesondere heißt es Ihnen auch diese Meldung, wenn Sie Ihre Festplatte von FAT-in NTFS. That was not the case in my situation. Das war nicht der Fall ist in meiner Situation. I tried to run defragmenter and it froze in the middle. Ich habe versucht zu laufen Defragmentierer, und es fror in der Mitte. After restarting, I got this message. Nach dem Neustart bekam ich diese Nachricht.

I’ll explain their method first (which did not work for me) and then two other methods to fix this issue. Ich werde erklären, ihre erste Methode (die keine Arbeit für mich) und dann zwei weitere Methoden, um dieses Problem lösen.

Use the Recovery Console to replace Ntfs.sys Verwenden Sie die Recovery-Konsole zu ersetzen Ntfs.sys

Pop in your CD into the computer and boot off the CD when prompted to “ Press any key to boot from CD “. POP in Ihrem CD in den Computer ein und starten Sie die CD ein, wenn Sie gefragt werden, "Drücken Sie eine beliebige Taste um von CD zu starten". When the Welcome  screen appears, press R to select the To repair a Windows XP installation using Recovery Console, press R option. Wenn das Willkommen-Fenster erscheint, drücken Sie R, um das zu reparieren einem Windows XP Installation mit Recovery-Konsole, drücken Sie R Option.

Reparatur-Installation

Next, type the number for the installation you want to logon to from the Recovery Console. Weiter, geben Sie die Nummer für die Installation Sie wollen Anmeldung von der Rettungs-Konsole. You’ll also need to know the administrator password in order to get to the command prompt. Sie müssen auch wissen, das Administratorkennwort ein, um sich auf die Eingabeaufforderung.

Recovery-Konsole

Now that you are at the command prompt, you need to enter in the following DOS commands, pressing Enter after each one: Nun, da sind Sie in der Eingabeaufforderung, müssen Sie in den folgenden DOS-Befehle ein und drücken Sie nach jedem ein:

cd \windows\system32\drivers cd \ windows \ system32 \ drivers
ren ntfs.sys ntfs.old Ren ntfs.sys ntfs.old

This basically renames the current ntfs.sys file to something else so that we can replace it with a new one that hopefully is not corrupted. Diese im Grunde benennt die aktuelle Datei "Ntfs.sys" zu etwas anderem, so dass wir ersetzen können Sie es durch ein neues, hoffentlich ist nicht beschädigt. Now type in the following command: Nun geben Sie den folgenden Befehl ein:

copy cd :\i386\ntfs.sys drive :\windows\system32\drivers Copy CD: \ i386 \ ntfs.sys Laufwerk: \ windows \ system32 \ drivers

Where cd is the drive letter for the CD-ROM drive that has you Windows XP CD, and drive is the drive where you installed Windows XP (most likely C:). Cd Wo ist der Laufwerksbuchstabe für das CD-ROM-Laufwerk, das Sie Windows XP-CD und Laufwerk ist das Laufwerk, auf dem Sie Windows XP installiert haben (wahrscheinlich C:).

That’s it! That's it! Now go ahead and remove the CD and type quit . Jetzt gehe weiter und entfernen Sie die CD und geben Sie beenden. Go ahead restart your computer and see if you are able to log back into Windows! Go ahead starten Sie den Computer neu und überprüfen Sie, ob Sie in der Lage sind, melden Sie sich wieder in Windows!

Fix Ntfs.sys error by using CHKDSK Fix Ntfs.sys Fehler, indem Sie CHKDSK

For some reason the above-mentioned method did not work for me! Aus irgendeinem Grund der oben genannten Methode funktionierte nicht für mich! I think it was because the file itself was not an issue, but that there were some problems with the hard drive itself. Ich glaube, es war, weil die Datei selbst war kein Problem, aber das gab es einige Probleme mit der Festplatte. So after trying to copy the new Ntfs.sys file from the CD and that not working, I thought I would try to run CHKDSK . Also nach versuchen, kopieren Sie die neue Datei "Ntfs.sys" von der CD und das nicht funktioniert, ich dachte, ich würde versuchen, CHKDSK.

You can run CHKDSK from the Recovery Console itself. Sie können CHKDSK aus der Wiederherstellungskonsole. So you would follow the same instructions as mentioned above, but instead of typing in the three DOS commands above, you would type in the following at the command prompt: Also würde folgen Sie den gleichen Anweisungen wie oben erwähnt, aber anstatt der Eingabe in den drei DOS-Befehle ausgeführt, würden Sie auf den folgenden Befehl eingeben:

CHKDSK /R CHKDSK / R

The /R is a command line switch that says to repair any errors that are found on the hard disk automatically. Die Option / R ist eine Befehlszeilenoption, die besagt, dass zu reparieren alle Fehler, die auf die Festplatte automatisch. CHKDSK can take quite some time to run, so be ready to wait. CHKDSK kann einige Zeit dauern, laufen, also seien Sie bereit zu warten. It took about 30 minutes on my computer. Es dauerte etwa 30 Minuten auf meinem Computer.

Luckily for me, there were several errors on the disk and CHKDSK fixed them all. Zum Glück für mich gab es mehrere Fehler auf der Festplatte und CHKDSK festen sie alle. I restarted the computer and Windows loaded fine, no missing ntfs.sys error! Ich den Computer neu gestartet und Windows geladen fein, nicht fehlen ntfs.sys Fehler!

chkdsk

Repair Ntfs.sys by doing a repair install of Windows XP Repair-by-doing "Ntfs.sys eine Reparatur der Installation von Windows XP

If none of the above-mentioned methods worked, you can try to do a repair install of Windows XP, which basically replaces all of the Windows system files. Wenn keiner der oben genannten Methoden gearbeitet, können Sie versuchen, eine Reparatur der Installation von Windows XP, das im Grunde ersetzt alle über das Windows-System-Dateien. Your applications and settings will remain intact, but you will have to reapply all Windows updates. Ihre Anwendungen und Einstellungen bleiben erhalten, aber Sie müssen erneut alle Windows-Updates.

Doing a repair install is pretty easy, the starting steps are the same as for getting into the Recovery Console, but instead of pressing R to repair, you press Enter to setup Windows. Doing eine Reparatur der Installation ist recht einfach, den Startlöchern Schritte sind die gleichen wie für immer in die Recovery-Konsole, sondern der Druck auf R zu reparieren, drücken Sie die Eingabetaste, um Windows-Setup.

Windows-Setup

Then you simply select the installation you want to repair and press R to start the repair. Dann wählen Sie einfach die Installation Sie reparieren möchten, und drücken Sie R zum Beginn der Reparatur.

Reparatur-Installation

Note that it may look like Windows is actually re-installing a fresh copy of itself, but this is not the case! Beachten Sie, dass es könnte wie Windows ist tatsächlich wieder eine frische Installation von Kopie von sich selbst, aber dies ist nicht der Fall! You’ll see the install screens like if you were to do a fresh install, but don’t worry, you’ll still have all of your applications, settings, and data. Sie sehen die Bildschirme zu installieren, wenn Sie waren zu tun, eine neue installieren, aber keine Sorge, Sie haben noch alle Ihre Anwendungen, Einstellungen und Daten.

Hopefully you now have a working computer! Ich hoffe, Sie haben jetzt ein funktionierendes Computer! If you are getting stuck somewhere, etc, post a comment and I’ll try to help you out! Wenn Sie werden immer irgendwo stecken, etc., einen Kommentar schreiben, und ich werde versuchen zu helfen Ihnen! Good luck! Viel Glück!

Technorati Tags: Technorati Tags: , , , ,

If you enjoyed this post, make sure you Wenn Ihnen diese Stelle, stellen Sie sicher, dass Sie subscribe to my RSS feed Abonnieren Sie meinen RSS-Feed ! !

» Filed Under »Abgelegt unter Computer Tips Computer-Tipps

Related Posts Verwandte Beiträge

2 Responses to “How to fix "Missing or corrupt NTFS.sys" error in Windows XP” 2 Responses to "How to fix" fehlt oder beschädigt ist Ntfs.sys "Fehler in Windows XP"

  1. Shoban Shoban said on : sagte am:

    How did you take screenshots? Wie haben Sie die Screenshots?


  2. Marco said on : Marco sagte am:

    Looks like it was running on some “virtual computer”… very interesting article, by the way! Sieht aus wie lief es bei einigen "virtuellen Computer"… sehr interessanter Artikel, übrigens! Hope I’ll never it… Hoffe, ich werde es nie…


    Please post your comments/suggestions! Bitte senden Sie ihre Kommentare und Vorschläge!