How to conserve your laptop’s battery power如何保護你的筆記本電腦的電池電源

Posted on March 18, 2007 at 1:10 pm張貼於2007年3月18日在下午1點10分

If your laptop is a power hog like mine and you can’t get it to last longer than an hour, there are some things you can do to make the battery last longer.如果你的電腦是一個權力豬像地雷，你不能夠得到它持續的時間超過一小時，有一些事情你可以做，使電池使用時間。 These tips are especially useful if you need to use the computer for an extended period of time and StandBy mode and all the settings under the Power Schemes dialog (such as turning off the hard disk or turning off the monitor) really won’t help you since everything needs to be on!這些提示是特別有用的，如果你需要使用電腦，以便有更長的時間與待機模式和所有的設定下，電力計劃對話框（如關掉了硬碟或關掉了監視器）真的不會幫你因為一切都需要以對！

Here are the major components that take up most of the power in a laptop:這裡是主要的組成部分，採取了大部分的權力，在一台筆記本電腦：

1. 1 。 Hard Disk硬盤
2. 2 。 Laptop Dislplay筆記本dislplay
3. 3 。 CD/DVD drive光盤/ dvd驅動器
4. 4 。 Network Card網路卡
5. 5 。 Modem調製解調器
6. 6 。 Floppy drive軟盤驅動器

These tips will be the most effective if you are planning on using your computer to do something where you don’t need to connect to the Internet or use your CD/DVD drive.這些提示，將是最有效的，如果你正計劃用你的電腦做一些事情，你不需要連接到互聯網或使用您的cd / dvd驅動器。 If you’re just writing a paper or creating a PowerPoint presentation, then you can extend your battery power the most.如果你只是寫一紙或創造一個powerpoint演示，那麼你就可以延長你的電池電力最多。 Since all of these devices use up power, the best way to conserve power is to simply turn them off!由於所有這些設備使用了權力，最好的方法，以節約能量，是簡單地把它們趕走！

Let’s first start with the display.讓我們先開始與展示。 If you’re running on battery, you need to make sure your display is running at the lowest brightness.如果你使用電池，你必須確保你的顯示器是運行在最低亮度。 Unless you can’t stand it, reducing the brightness on the screen will help a lot to extend the battery life.除非你不能站在這，降低亮度，在屏幕上會幫助很大，以延長電池壽命。 Almost all laptops have a set of buttons, usually across the function keys (F1-F12) that look like little suns with an up and down arrow next to the sun.幾乎所有的筆記本電腦都有一套的按鈕，通常是整個功能鍵（的f1 - f12 ）表示，像小太陽是一個向上與向下箭頭旁邊的太陽。 You press the Fn key located at the bottom left corner of the key pad and hold it down and then press the down arrow to reduce the brightness.您按下新生力量主要位於左下角的鍵按住它放下，然後按下向下箭頭，以減少亮度。

What the button should look like什麼按鈕，就應該是這個樣子

The next thing to do is to disable all the components that are not needed.未來的事是禁用所有部件都沒有必要。 You can disable components by going into the Control Panel Device Manager and doing it there.您可以禁用成分進入控制面板的設備管理器，並做有。 However, if you do it this way, you’re going to end up having to keep going back and forth to re-enable parts when you need them.不過，如果你這樣做，你也會為此不得不繼續下去，來回奔波，重新使零件時，你需要他們。 A better way is to create what is called a Hardware Profile in which one profile will have all your components enabled when you turn on your computer and the other profile will have some of the components disabled, hence saving power when the laptop is on.更好的辦法是創造一種被稱為硬體剖面，其中的一個側面，將所有有你的成分，使當你打開你的電腦和其他姿態，將有若干組成部分殘疾人士，因此節省電源時，筆記本電腦上。

Once you create a second hardware profile, you restart your computer and choose the new profile, go to Control Panel and disable everything that is not needed and shut down the computer.一旦你創造第二個硬體剖面，你重新啟動電腦，並選擇新的姿態，進入控制面板，並禁用的一切，是沒有必要，關閉了電腦。 Now when you turn on your computer, you’ll be given the option to choose which profile you want to load, so when you’re on the go with battery power, choose your power conserving profile and when you’re in the office or home, choose the default profile.現在，當你打開你的電腦，你可以選擇選擇何種姿態你想負荷，因此，當你登上圍棋與電池電量，選擇你的權力保育概況及當你在辦公室或回家後，選擇默認的姿態。

How to create a new hardware profile on Windows XP 如何創造一個新的硬體剖面上的 windows xp

1. 1 。 Go to Start, Control Panel, and click on System .去的開始，控制面板，並點擊系統。 If you don’t see System, click on Switch to Classic View at the top left of the Control Panel screen.如果您看不到系統，按一下就切換到經典觀在左上方的控制面板上屏幕。 Click on the Hardware tab and then click Hardware Profiles.點擊硬件選項卡，然後單擊硬件概況。

On the next dialog, you’ll see the list of available hardware profiles, which should only contain one item called Profile 1 (Current).就在下一對話框中，你會看到列出可用的硬件概況，其中應只包含一個項目，所謂的概況1 （目前） 。 This is the default profile that is loaded by default every time you start Windows.這是默認的，姿態是裝載默認每次你啟動windows 。 Once you add a second profile, the next time you restart windows, you’ll be presented with the option to choose a profile.一旦添加了第二個輪廓，你下次重新啟動windows ，你會介紹可以選擇的概況。

In order to create a new hardware profile, go ahead and click Copy.為了創造一個新的硬件概況，繼續並單擊拷貝。 This will copy the default profile, which we’ll be able to modify later on.這將拷貝這個預設的，而我們將能修改發表意見。 Next give your profile a name, something like Power Conservation so you know what it is.未來，讓您的檔案文件名，如電源保護 ，讓你知道它是什麼。

Click Ok . 單擊確定。 You have to option of changing how Windows will ask you about the profiles when you start up your computer, either by waiting until you pick one, or just choosing the default one after 30 seconds.你必須選擇如何改變視窗會問你有關概況，當你啟動你的電腦，無論是由等到你拿起其中一個，或只選擇默認後， 30秒。 It’s better to choose the second option otherwise your computer will just sit there waiting for you if you don’t pick anything for some reason.它的更好的選擇第二個答案，否則你的電腦會坐在那等著你，如果你不選擇任何出於某種原因。

Now you’ll see the new profile in the list of available hardware profiles.現在，你會看到新的姿態在列出可用的硬件概況。 Now click on the new profile and click Properties.現在點擊新輪廓，然後單擊屬性。 Choose “ This is a portable computer ” and choose whether or not it is docked.選擇" ，這是一部手提電腦 " ，並選擇不論它是否停靠。 Also, make sure to check “ Always include this profile as an option when Windows starts “.同時，要確保檢查" ，始終包含此檔案作為一種選擇時，窗戶開始 " 。

Now restart your computer and choose the new Power Conservation profile.現在重新啟動計算機，並選擇了新的權力， 自然保育概況。 This will be considered the “current” profile since you chose that one to start up Windows.這將被視為"現行"概況既然你選擇了其中一個，開始了窗戶。 Once you login , you go to Start, Control Panel, System and click on the Hardware Tab again.一旦你登錄 ，你去的開始，控制面板，系統，點擊硬件選項卡了。 This time click on Device Manager .這個時候點擊設備管理器 。

You’ll see a list of Devices that are currently installed on your computer.你會看到一個清單，設備正在安裝到電腦上。 You’re going to want to go through and disable anything you don’t need.你會希望去通過，並關閉任何你不需要的。 Now you need to be careful here and not disable something important or else your computer may not work!現在你必須要小心，在這裡，並不會禁用某些重要的，否則你的電腦可能無法正常工作！

You can be safe with disabling Bluetooth devices, DVD/CD ROM Drives, Modems, Network adapters, and Universal Serial Bus controllers.你可以安全的關閉與藍芽裝置 ，在dvd /光盤驅動器，調製解調器，網絡適配器，和通用串行總線控制器。 Don’t mess with anything else such as Disk Drives, SCSI and RAID controllers, Processors, System Devices, Displays, or Computers.不要亂七八糟的東西，否則，如磁盤驅動器， scsi和raid控制器，處理器，系統設備，顯示器，或電腦。 In order to remove these devices from the “current” hardware profile (the new one you just created on logged on with), right click on a device and go to Properties .為了消除這些器件從"當前"硬件簡介（新您剛剛創建登錄同） ，右點擊一個裝置，並到物業。 Do not choose Disable from this menu! 不選擇禁用從這個菜單！ This will disable the item altogether, regardless of hardware profile.這將禁用項目加起來，不論硬體剖面。

At the bottom, you’ll see a drop down menu under the heading Device usage.在底部，你會看到一個下拉菜單的標題下，設備的使用率。 This is where you can tell Windows whether or not you want this device to be enabled for a particular hardware profile.這是那裡，你可以告訴窗口，你是否打算將這個裝置，以使某一特定硬件概況。 Choose Do not use this device in the current hardware profile (disable). Now your device is disabled just for this particular profile.選擇不使用這個裝置，在目前的硬件簡介（禁用） 。現在您的裝置是殘疾人只為這個特別的概況。 Go ahead and do that for the rest of the devices.你儘管這樣做，而餘下的裝置。 If you plan on using something like your USB stick or CD ROM drive, then leave those enabled.如果你打算使用的東西喜歡你的usb棒上的光盤驅動器，然後把剩下的那些被激活。

Now simply restart your computer and pick the profile you would like to start with.現在簡單地重新啟動電腦和扒竊的姿態，你想先。 The devices that are disabled will not use any power or system resources and will increase the life of your battery!該裝置是殘疾人，將不使用任何電源或系統資源，並會增加生命，你的電池！

Bookmark, Share or Email this article. 書籤，分享或電郵這篇文章。

If you enjoyed this post, make sure you 如果你享受這個職位時，要確保你 subscribe to my RSS feed 訂閱我的rss飼料 ! ！

» Filed Under »存檔下 Computer Tips電腦貼士

Related Posts相關職位

2 Responses to “How to conserve your laptop’s battery power”第二反應是"如何保護你的筆記本電腦的電池電源"

      Pingbacks pingbacks
    1. UNE - ITD News une -信息技術司新聞 Says: 內容為：

      […] [ … ] http://www.online-tech-tips.co.....ery-power/ […] [ … ]

      July 4th, 2007 at 6:37 pm 2007年7月4日，在下午6時37分
      2. Pingbacks pingbacks
    2. Use Vista Battery Saver to increase the battery life of your Vista laptop 使用vista的電池省電，以增加電池的使用壽命，你的vista的筆記本電腦 Says: 內容為：

      […] What Vista Battery Saver basically does is disable the Aero interface and turn off the Vista Sidebar. [ … ]什麼境界電池省電基本上就是禁用航空接口，並關掉了vista的側邊。 You can also gain more battery power from your laptop if you disable Bluetooth adapter, turn off the CD/DVD drive, disable the modem, disable the network card, disable the sound card, disable the wireless card, and turn off the smart card reader.  The more things you disable, the longer the battery life!你也可以得到更多的電池功率從你的筆記本電腦，如果你禁用藍牙適配器，關掉光盤/ dvd光驅，禁用調製解調器，禁用網卡，禁用聲卡，禁用無線網卡，並停止使用智能卡閱讀器。越多的東西，你禁用，較長的電池壽命！ Here’s an article I had written earlier on how to create power profiles in XP to save battery power.這裡的一篇文章，我已致函早前就如何創造權力概況xp要節省電池電力。 […] [ … ]

      August 2nd, 2007 at 1:20 pm 2007年8月2日在下午1點20分
    Please post your comments/suggestions!請後，你的意見/建議！